I would just like to say

[Turktowner]

It does use a fair amount. I have a small 25 litre compressor and it lasts about three minutes. Enough for a straight cut in 2mm sheet about 400mm long.

Sounds excellent, most pips only need about three minutes

 

[Turktowner]

You have an LR product and can't weld?

Yip, I is a disgrace. Only weldin required so far has been a new rear cross member. Something I have neither the time or space to attempt.

An I can't weld neither, course..

 

[Turktowner]

This.

That?

 

[My Old Landy]

Yip, I is a disgrace. Only weldin required so far has been a new rear cross member. Something I have neither the time or space to attempt.

An I can't weld neither, course..

If you are ever up this way give me a shout and you can have a go with my welder

 

[My Old Landy]

That?

Indeed and some of the other methinks....

 

[Turktowner]

If you are ever up this way give me a shout and you can have a go with my welder

You're very kind. There's a bloke round the corner with an S3 that made a simlar offer. I just have friend issues
Landy peeps are the best

 

[Turktowner]

Time ferra a pre supper baff

 

[Hippo]

Am I being unreasonable?

I received my invite for the booster jab - 18.40 , almost forty miles drive just to get there, that's an hour at the best estimate assuming I do not get stuck in the evening home-going traffic. At best, I would have to leave home about 5pm and not get back until gone 8pm - all driving done in the dark - something I have been advised not to do for the last few years because of the growing cataracts.

I have declined the appointment as I believe offering it at that time to people like me who are in the 75-80 yrs stage in life is unreasonable, especially as they ask people to attend unaccompanied! Not that I could have done that.

If yer had a reliable Freelander then it would be ok. That distance at nite is too much in uvva vehicles. Especially int middle of no where. They should allow yer to book a day time jab.

 

[derwendolly]

If yer had a reliable Freelander then it would be ok. That distance at nite is too much in uvva vehicles. Especially int middle of no where. They should allow yer to book a day time jab.

But is a Freelander immune from cataracts?

 

[Hippo]

only the finest English toast for me

Same ere. We dunt want any of that forrun muck.

 

[Hippo]

You have an LR product and can't weld?

Eye does

 

[Hippo]

But is a Freelander immune from cataracts?

Ma hippo int gottid any so must be

 

[Hippo]

Lots ov rain smornin. Stopped at lunch. Edgar as adda baff innit. Eye has been hiding inside. Finkin about puttin the heatin ont now ferra hour. We is being bomb'd again.

 

[Turktowner]

But is a Freelander immune from cataracts?

Heee, brava ma'am
Though you might say that those that buys em has questionable eyesight?

 

[My Old Landy]

Heee, brava ma'am
Though you might say that those that buys em has questionable eyesight?

My brother has an FL2 so both eyesight and IQ is in question

 

[Turktowner]

My brother has an FL2 so both eyesight and IQ is in question

Mine has a Nissan Cashcow, bruvvers eh? Good article on FL2 in LRM this month, cheaperer than fried potato sticks parantly.
If I'm honest I'd rather have one of them instead of the bloated carp that came after.

 

[Hippo]

If yer a member ov me freelander gang then yer likes freelander's

 

[kevstar]

Does this mean you don't actooly have a compressor? Amazingly I do have one, much underused but still there. I too have only used a plasma cuttter once, beast of a thing but great for cutting thick steel.

Yup I have 2 but only small ones & one is brand new that I got free
I use propane & gas axe for bigger stuff cause I like to burn shit
Just reminded me that I have brand new harris cutting torch I will need to dig out
as I will be needing it for a chop chop job in a few weeks.

 

[kevstar]

Dodgy post of the day

OOooops sorry

 

[Turktowner]

OOooops sorry

Both posts were tongue in cheek mate.
No harm, no foul