P38A Viscous fan capacity?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mark Piercy

Well fumbled member....
Full Member
Posts
12,099
Location
Sud ouest France !
Just wondering on the 1999 2.5 oil burner auto.
Would anybody know what the CFM is on the original fan, my electric fan just manages to support the engine rad and I need a bigger unit to cover the oil cooler as well. I dont fancy boiling it in may on the off road courses. There are two I've found, both 16", one with around 1700cfm and another with 2600cfm. Any ideas please;) 80w and 120w respectively.o_O
 
Try a BMW 320/520 D 's 400W or MERCEDES 600W one.
I'm trying the BMW one but little scared whether the alternator (VALEO 105A) can handle it.
Remember, there are pushers & pullers, depending on the location- prior to /after radiator
 
Bigger certainly is! A flipping great Lancaster bomber prop!
I did look at the Volvo XC90 fan, massive unit but digital controlled..
Good point about the alternator output Kapil.
The fans I've seen are only 2.5" deep and will go nicely behind the rad and just in front of the water pump pulley.:cool:
 
Get yourself one of these AA63ECF4-F978-4A4F-825A-C79E2566C8F4.png
 
Stoneyracing do a 220watt 16" fan in either push or pull configuration. It pulls 15-18ish amps when running, which a healthy 100amp alternator should just manage without draining the battery while idling.

If you pinch a 400watt one from a 320d (1999 onward), as kapilamuni suggested - many of the touring ones had big 200-240a leisure alternators from the factory - food for thought (and alternators for swapping!)
 
Mark, it's straight bladed. It's noisy just like the standard VC fan. Go for a curved bladed one .
Generally, higher the wattage higher the CFM.
 
Get the engine too.:D:D
I have read, somewhere in early 1950s ROVER had a jet engined car called "JET 1".:cool:
the rover P6 was meant to have a jet engine and the coil spring suspension on the classic RR was influenced by the very same car:cool:

Mark, it's straight bladed. It's noisy just like the standard VC fan. Go for a curved bladed one .
Generally, higher the wattage higher the CFM.
the Clio fan I have is also a straight blade type but It doesn't bother me very much. I at least know it's running;)
 
Back
Top