pocketrocket
Active Member
- Posts
- 655
- Location
- sheffield
Can anyone tell me for sure what the size is for the "big nyloc nut" that holds the drive flanges on on the transfer box? mines a 96 300tdi, ive done a few searches and found 2 possible answers;
1 says its a 30mm head size (or spanner/socket size)
2 the other says its a 30mm (and thats it no other description)
Can anyone say for definite? Ive already replaced the front bearing/seal and wanted to make a custom slide hammer to make the rear a little easier to replace..........
Thanks in advance
1 says its a 30mm head size (or spanner/socket size)
2 the other says its a 30mm (and thats it no other description)
Can anyone say for definite? Ive already replaced the front bearing/seal and wanted to make a custom slide hammer to make the rear a little easier to replace..........
Thanks in advance