Bristol and West Land Rover Show 2013

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Status
Not open for further replies.
Mine broke down my timing id ####ed and its not advancing or retarding on the hose going from distributor manifold!

take the screw out of vac unit and suck the hose it should move- refit and don't lose the screw.

has the ****ty plastic retainer under rotor arm come adrift?
 
take the screw out of vac unit and suck the hose it should move- refit and don't lose the screw.

has the ****ty plastic retainer under rotor arm come adrift?

Sucked on the pipe and there is not movement not sure what screw there is 2 holding the vac unit on the dizzy which I don't have the tool to undo:mad: the dizzy apears to be ok. Ticking over at 1200 rpm.
 
looks like ill have to pull out of this years avent , sorry to let you all down ive just been banned from driving for 30 days as my eye sight has deterated to a dangerous level again due to the diabeties
sorry everyone was looking forward to this aswell

Sorry to hear that mate. Give us a shout if there's anything we can do
 
Sucked on the pipe and there is not movement not sure what screw there is 2 holding the vac unit on the dizzy which I don't have the tool to undo:mad: the dizzy apears to be ok. Ticking over at 1200 rpm.

I'm tight on time, could possibly do a flying visit are you home?
 
might have to invest in a sun lounger so that I can bring it down to the show and recline in company - bit a la The Romans :eek:

Back or no bloody back I'm coming to the show- might not see any more of it than the tent and the beast but i'll be there.
 
Status
Not open for further replies.
Back
Top