I'd like some 'disguised' rock sliders that look like normal sills, do they exist?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
They're about 10" wide from edge to edge with 3.5" sitting in under the bodywork, wheel arches stick 2" out anyway so that leaves the steps 5" past the edge of major body panels which isn't that much
 
They're about 10" wide from edge to edge with 3.5" sitting in under the bodywork, wheel arches stick 2" out anyway so that leaves the steps 5" past the edge of major body panels which isn't that much

Legal or not adding 10'' to the width is a fook of a lot!

Exactly why I took me side steps off
 
They're about 10" wide from edge to edge with 3.5" sitting in under the bodywork, wheel arches stick 2" out anyway so that leaves the steps 5" past the edge of major body panels which isn't that much

tis still 13" overall as ya can squeeze thru and flatten (rip off ya wheel arches) A lot of the lanes near you. Are a struggle to get thru the gates. in a standard disco.
 
could your bumpers stick out that far and be legal?

Is this legal??

defender-front-03.jpg
 
tis still 13" overall as ya can squeeze thru and flatten (rip off ya wheel arches) A lot of the lanes near you. Are a struggle to get thru the gates. in a standard disco.

Yep that said though disco is 70.6" wide, series 3 is 66" wide so theres 4" from the off, lanes I usually take the disco goes through with ease so an extra 4" say a disco with side steps will be fine ;) or rather Disco Dad in his disco with sliders fitted just fine and they're about the same width as side steps so I'll be reet by that reckoning :D
 
Yep that said though disco is 70.6" wide, series 3 is 66" wide so theres 4" from the off, lanes I usually take the disco goes through with ease so an extra 4" say a disco with side steps will be fine ;) or rather Disco Dad in his disco with sliders fitted just fine and they're about the same width as side steps so I'll be reet by that reckoning :D

so 80" wide series then :eek: :eek: Assuming it moves when you've finished "OVER" engineering all the bits for it..
 
Depends how far in I mount them, I could probably push them in a little more and its more like 12 inches max rather than 14 ;) so not far off a modded disco as I said


Yeah but a disco is barrel shaped and waist line sticks out a good 2". so 4" steps will only ADD 2" each side. making 74" so still 6" narrower than ur series. :rolleyes:
 
Back
Top