Search results

Are the intercoolers of ebay any good? Need a new one for my disco 200tdi engined 90 but they all seem to be £400 unless you go on ebay. Can't seem to get original ones anymore

Set of 4. Size 265/75/16. Two tyres have really good tread at least 10mm. But two have 6mm tread and at there lowest point have 3mm where I let the tracking go a bit. These two tyres also have some cracking in the side walls. £50 for all four just to get them out of my shed. Located near...

Set of spacers for sale off my 90. One year old, all fittings included. £80 near Kingsbridge Devon.

Complete hard top and rear door for sale. Includes seals. Located in Loddiswell Devon. £120. 07834872641

In the south west. Want a tailgate as well. All to fit on my 90.

Thinking of fitting truck cab on my 90. Is it easy to fit to fit the hinge points need for the tailgate? Can you get the hinge points ok?

Want some advice really on what to look for... I have a gardening business and tree felling. I have a defender 90 with 200tdi fitted. I have come to the conclusion that if ever my faithful 90 conks out in a way that it will be off the road for a week (being self employed that would hurt...

I dont know if this has been done before, i have never seen it. I was putting in new wheel bearings in the front of my ninety. Looking around for something big enough to drift the seal into the rear of the disc/bearing housing. I looked at the thick drive flange laying on the wing of the land...

I have a defender 90 and also have the innards of a diso 1 front axel. What i am wondering is, could i put the diff from the disco in (24 spline) also put the half shafts including CV joint and stub axels with the thin drive flanges. Would it all work out the right length? At the moment it has...

K&N type cone filters or paper filters, whats the preference? ever since putting a cone filter on it seems to black smoke when "lugging" up from pull away or when the turbo cuts in going up hill. I have done the necessary backing off the fuel pump, but is the filter restricting the airflow too...

My Ninety has a 200 tdi fitted and has 200 tdi radiator setup. Decided to put a replacement radiator in which was a britpart. Got it all fitted in started it up and could hear this gurgling sound. Before i realised it half my engine oil was on the floor:mad: Ithought i had done up those oil...

I am selling these parts cause i need the space. Buyer must arrange collection or pick up themselves... Set of 4 x Disco black steel rims with 205 16 tyres on which are barely legal £30 2 x 24 spline rear half shafts thin flange little wear but still great £15 2 x 24 spline front half shafts...

A shed load of parts i am selling to clear some space all parts need to be collected from Kingsbridge devon or you arrange carriage... Viscouse fan £5 Brake servo with resevoir £15 Inside dash for defender £5 Front of seat box panel £10 Genuine land rover exhaust system, Dont what i took it off...

enquired about a second hand xfer box 1:41 and the local landy specialist said he wanted £150 even though he advised changing the input gear on it cause its worn. Is that steep? sounds alot to me, i thought you could pick them up for around £50 even if they do need the input gear changing...

My ninety has a 200tdi fitted from a disco and associated gearbox and transfer box. I am thinking though that because i am towing alot the gear changes are long and sluggish. Maybe i am better going back to 1:41 ratio. Can i just swap this box over? i understand there may have been some...

May be a daft question but how do you post an advert in the "bits for sale" section. When i try to, it ells me i don't have privilages. How do you get them, cant see anything that tells me.:confused: Cheers

Bought my 90 that already had a 2" lift on it, it looks the biz but cause i don't want to do off roading that much and need to tow alot with it have decided that i want to drop it back down to its original height. When i towed a tipper trailer that i have just bought, you could really tell it...

Has anyone got a list of idents. i have looked at my markings which are done with a dot punch. they could be a number of alternatives cause the marks are so close to the seam

Got a knackered front swivel housing where i had to drill out the calliper bolts. I have a disco 1 front axel available. Will the swivel housing from the disco fit the 1986 ninety by just stripping it down and swopping over. Also will the half shafts and CV joints just swap over if i do the diff...

frontdiff - YouTube frontflange - YouTube reardiff - YouTube Here goes... Hopefully the links above will work. The first one is the play in the front axel, the second one is front drive flages and the last one is the play in the rear axel. In my endevour to cure the clunk when changing gear, i...