Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P38guy

    Fuse 40 EAS&SM blowing

    I have brought many many items including compressors and valve blocks from Kurt and never had any problems with his supplies. It is a problem especially with compressors that owners identify that the compressor is worn out and needs replacement without finding why the old compressor failed ie...
  2. P38guy

    P38 parts in Suffolk

    Bulldog Trading ?
  3. P38guy

    Temperature gauge rising slightly

    I have never seen or heard my A/C fans switch on since ownership and from what I have read on the topic it would be unusual in the UK climate for them to operate ?
  4. P38guy

    Bottle jack refill?

    Volvic :D
  5. P38guy

    Rear boot lock botton failed

    Open from inside by removing carpeted panel on lower tailgate then you will be able to replace the spring :)
  6. P38guy

    EAS Compressor fault

    Yep have come across that problem before :(
  7. P38guy

    Cheque Book Symbol

    Hope that turns out better than the EAS box ventilation mod you did a while back :D:D
  8. P38guy

    Drinking oil!

    Oil consumption......... 2 places leaked or burnt, seals or rings a compression test will narrow down diagnosis. My 4.0 uses on average 1/3 pint between 6,000 mile changes
  9. P38guy

    Immobiliser lock out, advice needed

    Fob request code can be obtained from BBS
  10. P38guy

    Immobiliser lock out, advice needed

    Resync the becm to engine ecu with the Nanocom all the help you need is on the BBS forums
  11. P38guy

    4.6 Running lean pinking

    Trouble shooting manual may help https://docs.google.com/file/d/0B0GHeyqlQgdWODhlYTViOWYtMDg2Ni00ZTUxLWJjYWItNGZiNDRlZDc1ODRm/edit
  12. P38guy

    And again!!

    Enjoy the rest of your trip :)
  13. P38guy

    Size of mudflap screw?

    M5 X 20mm
  14. P38guy

    how can i put the P38 4.6 engine working without BECM

    Is it Gems ? Mobi-Lize
  15. P38guy

    What did you do with your Range Rover today

    Drained and replaced brake fluid no evidence of it ever being done from the service records since 1995 :eek:. Very simple and worthwhile job that i had not been looking forward to doing
  16. P38guy

    No revs when in gear

    Update: Many thanks for the replies VCU was seized and found that problem after test Fuel temp sensor replaced and cured the revs fault :) Now on to the VCU and other repairs RF receiver, door locks, heater matrix o rings, airbags the list goes on :eek:
  17. P38guy

    No revs when in gear

    Thanks Wammers, fuel temp sensor fault was showing on diag and yes nothing to do with the no revs problem, interesting that no other faults are logged. just swapped gearbox ecu and no difference. Could it be seized vcu ? will do the test and find out
  18. P38guy

    No revs when in gear

    O.K Fuel temp sensor is it in pump ? I know the petrol fuel temp sensor is on fuel rail but on the diesel no idea. If it is in pump is it a D.I.Y fix special tools etc. I noticed on another thread the sensor can be bypassed to get it working as a temp fix ? Thanks
  19. P38guy

    No revs when in gear

    97 Diesel Auto Guys I'm on my way to a new LZ members rangie No revs when in gear hi or lo box foot to floor and nothing but a crawl revs are normal when in N or P any ideas appreciated
  20. P38guy

    starter problems

    Not this one by any chance ? '97 Range Rover, offers welcome. For Sale in Galway : €750 - DoneDeal.co.uk
Back
Top