Search results

Hi All Where can I get the small screw that holds the lock barrel on my defender, or what size is it ? cheers

Hi all Any one know what the electrical connector is on the tempreature sender on a 300tdi, strange looking thing,mine wont stay on. Thanks all

Hi All I have a little problem with overheating, my gauge goes up to red and I have found the thermostat housing was hot but top hose cold. So I change thermostat but no different. So here `s the question, could it be the water pump ?, I`ve always thought that if the water pump failed it would...

Hi all I have taken my cubby box out of my 300, and have fitted a center seat I got on ebay, now heres the thing, the seat seems to be too wide, and when fitted I am unable too move the drivers seat all the way back. Is there any thing I am missing here, there was a center seat fitted...

Hi all Seems I have a leaking rad on my Defender 300tdi, can this be changed without removing the fan unit ? cheers all

Hi all My clutch pedal has gone rock solid, while driving home yesterday in heavy traffic. Can I take it thats my clutch gone, may seem obvious to some but is there something else that needs looking at. I changed the slave cylinder last summer with a oem one, and theres fluid in the master...

Hi all where are you buying your replacement steering boxes from, Mine needs to be replaced and is an Adwest one 4 bolt. I would like another adwest one, but am unsure what gets sent out when you get a remanufactured one. any advice welcome. Thank you all Ray

Hi all Just had my cam belt changed, and when I drove it seemed a little flat. When I started the engine after 2 days not using the landy, it was very flat and smokey on startup, the smoke clears but she seems a liitle less responsive. Same thing again this morning. The belt was changed by a...

Hi all I am looking to get a swing away wheel carrier for my 90, but my crossmember is non standard, its a black sheep offroad one. I understand that one of the brackets fits in to the existing holes in the crossmember, and then you set the rest up from here, drilling holes in the body capping...

Hi all I am going to change the slave cylinder on my 300tdi, and after searching the forum, its apparent that you can sometimes pull the pushrod out of the bell housing by accident resulting in an gearbox out event. Any tips on removing the slave, can I get some wire nosed pliers behind and...

Hi All I am looking at getting my cam belt changed on my Defender 300tdi, I have had 4 quotes, My mechanic wants £340, but seems reluctant I then tried 3 landy specialists, one wanted £225 + vat but if it needs the mod kit, another £100 and he wont know until hes stripped it out. Another...

Hi all Got a set of wipac leds for my 300tdi this week, just fitted them and only the stop/tail ones work. The side lights don't work , I`ve left lights on and swapped back to original lucas ones and there on straight away, The indicators wont flash, but the side repeaters do, swapped back to...

Hi all I`ve had to replace the relay on my spotlights/ driving lights for the 3rd time in a year. 12v 30A 4 pin any ideas why, there`s no obvious reason cheers Ray

Hi all where can I get a replacement hose for the brake servo to vac pump on my 300tdi. or is it some sort of standard size. Cant find one anywhere. regards Ray

Hi all I`m after the jack set that goes behind the seats for my 90, please :D

Hi all Does any one know if the bulkhead and footwell mat from a Td5 Defender will fit a 300Tdi. This is the one that goes behind the pedals and fusebox etc Its a 2 piece set up on the Td5, but 5 or so on the 300tdi cheers all

Hi all While changing the wheel bearing on my 300, I trashed the oil seal trying to locate it. I found that the hub had a small rim around it, where the seal sits, that picked off in places, but prevented the seal from locating. I filed it away and fitted a new seal, and it seems fine. the...

Hi all Recived my wheel bearing kit today and I have noticed that one of the 2 large nuts has a flange on it, cant say that I noticed that on the ones I am replacing. Is it some sort of spacer or does it replace the spacer washer thats fitted on the old bearings. Or am I completely...

Hi all I am about to change the wheel bearing on my 300 Defender, and am aware that you have to knock out the old races from the hub, and press the new one back in. I have seen a Wheel Bearing Race & Seal Driver Set on ebay, which looks ideal, but I am unsure as to the size of driver that I...

Hi all Still having a problem with the brakes on my 90, work fine and then pedal travels further every 3 or 4 presses. Seems like air still in system, have used a eazybleeder, but am now looking at a vacuum bleeder on ebay {271345055450}, Which is better ?, my mechanic says the vacuum, whats...