Search results

Thanks Brian,,will try it tomorrow morning when it's cooler,do indeed t cut for metallic paint(I have both) Chris .

How can i clean and polish my disco to a showroom finish,every time i wash and polish it it never shines like some of the cars i have seen for same age,it is a disco 2 2003 i have some t cut but would that damage the top laquer?

Hi Brian,thanks for your reply,yes it is visible steam coming from the central air vent,No windows misting up, no coolant loss,what i was worried about was the heater matrix leaking but hopefully thats ok.

Disco 2,steam coming out of central air vents the other day ,heaters playing up ,if you set temp to say 21c when that is reached it cuts out then goes cold and stays cold,same with aircon set it to 16c once that is reached very often it cuts out then just warms up, Worried about the steam ,can't...

Thanks for that,i shall try that,just topped the gas up,slight leak on charging port,hope it seals itself. Chris

Just topped my disco2 with STP recharge gas and after filling noticed a very slight leak from recharge valve,I put the cap back on tight,checked again with cap seems ok took it for a run to seal the system,is there anything else I can do? Chris

Hi,can I use my Hawkeye total to test my air conditioning,I have just bought the STP recharge kit and want to make sure it's all ok before I top it up,not sure if the fan on the front of the condenser is working. Is it ok to run the compressor all the time .Have lost the shim off the front...

I think I'm being too fussy,time to put in a washer and see if it switches off,

Thanks Dieseldog for the video very helpfull, Pawl

A local garage has put a bolt in,but no shims,so its working all the time ,is this ok,or should i fit some shims in.Are they the same as washers? Chris

Is there a cover to go over this ,or is the bolt and shim all i need

Would this be why my Aircon is not working Chris

Thanks Matt,I will check the coolant tomorrow, got to be something simple Chris

Went out this afternoon heaters set at 21centigrade drove 30 miles really warm all the time,stopped went shopping came back 1/2 an hour later and they didn't warm up at all engine temp gauge normal,been playing up some time now A/C not working at all,could it be a loose wire or sensor,would a...

I have been told to check the wiring from my xyz switch,because of problems starting and m&s lights flashing,i have had it over the pit but cant see the wiring beyond the connectorplug from xyz switch,would it be easier to take out the centre console ,i believe the wiring loom is about 2 feet...

Are they easy to use,and which hawk eye is best I believe there are 2 models.if I send the car to the garage to be fixed it will cost possibly double of a hawk eye reader,£100 to go on the computer.the bills just go on and on.

Would a hawk eye reader help to identify the fault and confirm if the xyz switch is faulty,Ihave plenty of things to check at the weekend everything mentioned in this posting is worth looking at.

Thanks Bobdog,I shall try all that,looks like its possibly the xyz switch,what is this?and where can I find it. can I bypass all this.If I run a wire from tab 86 of the relay to earth I can start it normally on the key,or will I upset the ECUs

M and S lights have been reset on my mates hawk eye,xyz switch replaced 2 years ago,will check for voltages etc