Search results

Are you referring to the cyclone breather on top of the engine, or is there another breather that I am missing?

Once the case is open, it’s pretty difficult to tell where the leak is coming from as there is oil everywhere. I was considering taking the timing cover off and running the engine for a minute to try and see the leak - not sure if that is a great idea though.

Hello, My 200tdi has always leaked oil from the front wading plug hole. I have had a bottle rigged up to it and have made do with just emptying it every couple of weeks. I recently decided to replace the crankshaft and camshaft oil seals, along with polishing the pulleys where the seals run...

Hoping someone can shed some light... I was towing a car on a trailer tonight (about 2.5 tonnes) in my 200tdi up a fairy steep hill when I started to get a whine from the gearbox. It would only appear under power and mainly in 3rd - 5th. I stopped to let everything cool down and the whine...

About a month ago, I started to have issues with my starter motor. Now every time I try to start, I can hear the starter motor spinning but the solenoid doesn't seem to be engaging the starter gear with the flywheel (takes about three or four attempts then the car will start). I took the...

Are you sure it's gearbox oil leaking out of the bell housing? If it's coming out of the wading plug hole then it could be engine oil which would likely mean you need to replace your rear crankshaft oil seal.

Sounds to me like the spring inside your lock has snapped. This happened to me a while ago. There is a repair kit you can buy and it's just a case of drilling out the rivets, replacing the spring and installing the new rivets which are included in the kit. Here's a link to a repair kit...

Thanks for the reply. What do you do around rivet heads? I am taking all of the paint off of them but this might not be a huge problem.

Hi Guys, Currently spraying my whole 90 inside my garage with polythene sheeting up everywhere. I'm painting it with tractor primer and top coat which is a synthetic enamel. So far, the whole thing is in primer and it looks ok but there is some slight orange peel (I believe this is caused by my...

Cheers Guys, Much appreciated.

Hi Guys, I'm currently rebuilding my defender (no thread on here as I can't understand how anyone has the time for that as well as a rebuild!) and I am fitting the new plug style of lights onto it. The defender is a '93 200tdi so it originally had the lights that are earthed through a screw...

Thanks for all of your replies, my welder is just a cheap Clarke welder. I think what I'm going to do is try this out with some of my old panels. I have rig welded aluminium before but I don't have access to a tog anymore and I'm sure mig welding aluminium is quite different to that. And yes...

After trying and failing to get new rear wings for my tub I was trying to work out how to sort mine (very badly damaged). I tried panel beating but it didn't go well and the panel seems to be far too wrinkled to sort. I had a thought tonight and wondered if I could buy aluminium wire, pure argon...

Evening all, I'm looking to replace both of my rear wings because they are completely knackered. I've been searching for ages through all of the parts websites I know of and I've found a passenger side wing from Craddocks for £40 which is very reasonable. However, I'm having a real problem...

Just found someone selling a replacement rear crossmember on gumtree for a 110 300tdi. Would this fit my 200tdi 90 chassis?

I decided to take my power steering pump out and overhaul it. After a quick look on here and a google search it seems like nobody sells parts for these other than a seal kit. There is a roller bearing at the front of the pump which I can easily get a hold of but there are also two bushes which I...

Don't think it's the uj as I had that off a few weeks ago and it was fine although I suppose there's no harm in trying. I'll try the exhaust as well, do you think it would just be the rubber hangers that are gone or maybe something inside one of the silencers that's loose?

Hi guys, I've got the strangest noise coming from my defender. It only occurs when I'm going about 30-35 in 4th and 5th gear. The noise is a sort of low growl as of there is some sort of sheet metal piece rattling but I can't see why it would only happen at this speed? There is also a...

Cheers for the replies. I'm getting a wee puddle (about 200mm diameter) on the road when i'm parked at work for the day. It seems to be up the side of the engine where the dipstick and turbo are and on the heads of the sump bolts.

Hi guys, this is my first post as an owner so go easy if I ask anything stupid. I've tried searching for the answer to my problems on the forum but no luck. Anyway, I've just bought a 200tdi defender and it's leaking a fair bit of oil. I tried having a look today and it seems like it's maybe...