Search results

Hi all, The disco 1 shall require welding in the coming weeks, the welding require is at the rear, where the chassis mounts connect to the body (body side). I've sourced someone to carry out the welding, the question is, would it be easier to purchase these inner sill mounts to weld in? Rather...

Hi all, Need to replace the bonnet release cable on the disco 200tdi - can anyone inform me as to which type there is a TA and MA? https://www.ebay.co.uk/itm/230913576836?hash=item35c3858f84:g:WxoAAOxyDgRQ9tM5 https://www.ebay.co.uk/itm/221178316719?hash=item337f4147af:g:U6UAAOxyQ45Q9tM2 Thanks

Hi all, Does anyone know the original colour of the 200tdi disco 1 wheels? The center caps on mine need a refurb and would make her look great! Thanks

Hi all, The interior trunk/boot light on the disco was not working, from taking it out and realise there is a missing bulb and perhaps something that slots over the bulb to hold this in place. Could anyone let me know if the bulb just sits inside the outer plastic housing somehow, or is there...

Hi all, Disco 1 200tdi rear wiper motor can hear turning spinning or doing something but the wiper is not moving, guessing the pinion is seized any advice on how to fix this. Thanks!

Hi all, Working on the brakes recently on the disco, not driven for 18 months or so. Yesterday after bleeding and changing some of the lines went for a careful drive, on pressing the brake pedal this felt hard, but not the usual soft to hard. The pedal effectively presses the calipers in but...

Hi all, Carrying out a service on the 200tdi and noticed a filter to the rear of the vehicle underneath, does anyone know what this is? Thanks

Hi all, Yet another thread here. First of all thoughts on replacing discovery 1 200tdi discs, they have been sat for around 18 months, would a couple of careful drives see them back to normal? Replacing the discs on this look more involved than first thought, it's not a standard replacement...

Hi All, After changing the brake lines on the disco, the front left, passenger, nearside caliper is bleeding but only comes out as a trickle when using the gunson ezi-bleed. The upper rear nipple on the caliper bleeds as expected with a good flow but the front nipple only blobs out. Is this...

Hi guys, I'm in the process of fitting a 300tdi bumper to my 200tdi as the old one is rusted. The end caps from the 200tdi fit but there is no where to mount the sides onto the body of the disco, is there some kind of bracket missing? Or should I need to purchase 300tdi end caps? Thanks,

Hi all, I know this question is asked alot, but there is conflicting information on the gearbox oil especially. The disco in question is an early model 200tdi, believed to have the LT77 gearbox? I've listed the following: - Diff oil EP80/90 GL4 4 litres - Transfer box EP80/90 GL4 2.7 litre -...

Hi all, Swapping out the A-Frame balljoint on my disco 200tdi - I thought removing would always be the major problem here but when it comes to refitting the bolts are struggling to line up and slide in. In regard to bolts these are the ones sliding into the top of the new a frame balljoint...

Hi all, Making use of a Disco 1 300 rear bumper onto my 200tdi - would the additional lights if unused become a problem MOT time? Many thanks, Chris

Hi all, My Disco 1 200tdi has failed the mot for leaking oil excessively from the offside front tranmission. Any thoughts as to why this might be or any common weak failure? Thanks

Hi all, Disco 1 MOT failure, failed on a few things, but one of these trying to identify is the following: Central Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) Is this the A Frame ball joint? I always thought this was more towards...

Hi all, My disco 1 200tdi, is starting to form rust at the bottom of the B Pillars, it's visible and looks pretty bad, is this an MOT failure? Instead of welding a plate, could I use a plate and cold weld say 2mm thick steel to patch the holes? As this provides no structural support would this...

Hi all, Renewing some of the brake lines in the engine bay, just wondering, does it matter if I route the n/s / passenger side lines a different way? Essentially bypassing going around the washer bottle, and going straight passed the mount then up under the bulkhead area. Thanks

Hi all, Lurking low browsing the forums for a while, I just wanted your opinion on my D1 Disco and whether she's worth keeping, fixing up or letting go. Reasons for keeping, it's awesome, mega capable, clean-ish and it's been in the family since brand new! L reg disco with 225k miles (all...

Hi all, Apologies for posting here, but I cannot post into the questions sub? My Disco 1 lights front / rear sidelights /headlights have stopped working. The indicators work but the main lights will not come on. Is this likely a relay? earth? Dash stalk? Any advice would be great...

Alright guys have a discovery 1 93 200tdi. The headunit is at the bottom of the dash not the middle. Having a problem installed after market headunit as the standard units screen went blurry. Having problems trying to push the headunit into place because of the lack of space behind it to...