Search results

Hi, I'm trying to source the parts or the part number for the spacer and pivot stud / bolt that goes through the throttle linkage cam plate into the large hex nut on the end of the throttle spindle as seen in the picture below. Can anyone help? Thanks, -Pos

Hello, Bit of a strange one for you guys: Over the course of the last few weeks I noticed that the CD player in my Defender kept loosing its settings - 12V permanent feed for memory seemed like the most likely cause. It got to the point earlier this week where the radio wouldn't turn on at...

Hello, Does any body know the part number or perhaps even a source for the section of air intake hose that fits between the air filter housing and the turbo inlet on a Defender 300tdi? It's the section that goes around the back of the engine. Mine seems rather supple and I am not too sure as...

Hello, Has anyone else noticed a little 'nodule' that is part of the casting on the outlet at the bottom of a 300tdi intercooler? I assume that it is designed to act as a type of barrier to prevent the bottom intercooler hose from being pushed down any further onto the outlet but I can't seem...

Hello, I regularly check the coolant level in my 300tdi header tank and I have never really noticed any activity in the header tank whilst the engine is running apart from the level dropping slightly as the engine is revved. Yesterday I decided to clean my intercooler which required the removal...

Hello, Sods law isn't it... I was out and about playing in the snow without a hitch but yesterday a spot of black ice on a 90 degree bend near my house sent me straight into the curb at about 30mph. When I set off again, my steering wheel was 45 degrees out of line (pointing to the left) and my...

Hello, Can anyone tell me which size LED I will need to suit the speedo, fuel and temp gauges on a 300 TDI Defender (1995) its either a T5 or T10 but I would like to order some before I take the panel off! Cheers, -Tom

Hello, I have recently acquired a 300tdi 110 and having given the interior a really good clean earlier today, I noticed a rocker switch behind the steering wheel on the right hand side, parallel to the ignition barrel. Does any one have any ideas what this might be for:- as in, did Land Rover...

Good evening, I am interested to see any pictures of repairs that people have made to their chassis. My new (to me) 1995 110 is in need a few little bits of fresh steel splicing in down the nearside chassis rail between the gearbox crossmember and the rear trailing arm mount where it's gone...

Hello, I know there are plenty of threads relating to power steering problems but I can't seem to find one that asks the questions I want to ask. I have just bought a 110 300tdi and I was well aware that it had stiff steering. It has now occurred to me that there is very little, if not no...

Hello, I've just bought a 300tdi 110 to replace my 200tdi 90 and there is no history regarding the timing belt. Naturally I am going to replace it as a matter of precaution but I have been reading lots and lots of things about timing modification kits that Land Rover produced. Apparently there...

sold

Good evening, I will be adding an official advert into the for sale section shortly but I just wanted to put a bit of a feeler out to see if anyone is interested in my 1986 200tdi 90? I am selling to upgrade to a 110 300tdi (It's too good an offer to refuse and I could do with the extra...

Hello, Can anyone explain the wiring circuit between my battery and the injection pump stop solenoid on my 200tdi 90 please? Does it pass through any resistors or relays etc on its way through the ignition and is there anything in the system which could draw current away from the wire...

Hello, Does anyone have a complete 200tdi rocker shaft that they want to sell / donate? They're quite hard to come by! Thanks, -Tom

Hello, I have done quite a bit of reading regarding replacement suspension springs for my 1986 90 but I am still a little confused. It currently has standard height springs fitted which are probably the originals and I would like to replace them with standard height springs from someone like...

Hello, I have a question regarding the discovery 200tdi fitted to my 1986 90. I have standard 90 axles with the standard 90 transfer box and a standard LT77. The tyres I have fitted are 16x235x85, so quite tall. If I am driving my 90 at 60mph, roughly what RPM would it be doing? I drove to...

Hello, The turbo on my 200tdi has been droning at me for a month or so now and following an inspection just a few moments ago, it seems the bearing is shot. There is a lot of up / down movement in the compressor and it is passing rather a lot of oil. So... Does anyone have a 200tdi turbo in...

Hello, I am doing away with the mechanical lift pump on my 200tdi and require a blanking plate to cover the recess. I have two options available. I can either remove the entire cam cover plate (the bit that the lift pump bolts to) and fit a solid plate in its place, or simply find a piece of...

Hello, I am about to tidy up the rear load space of my 90. My intention is to create a stealth camper. I would like to ply line and carpet the back with recesses for the windows and then create a small bed area at the back to give enough space for a quick, comfortable kip and some storage...