Search results

Take it to a different garage. Wheel bearing, driveshaft universal joint or similar. Economic fix.

D2 only fill airbags when all doors are shut.

An mot is just for the day. Google is forever.

Found this on a breaker I bought. 22P block on older style head. Crate block replacement.

Does anyone know what thread size the plug actually is so I can have a new one ready to go? Thanks.

After reading this thread I haven't come up with a fix for the doors but I've bolted a steel plate under the slam plate for the bonnet so the scrotes can't pull the cable release for the bonnet. No pics as it's a secret. I'm just trying to slow them down. :(

Searched and found the answer. Yep, just took the catch out and lubed it up. Refitted for the moment as the cable hasn't actually snapped, just stretched. New cable ordered, it will only be a 30 min job to replace cable next week. :D 53 reg Freelander, due for MOT. Mrs wants a Defender...

From searching elsewhere on here a 10mm ratchet spanner is ideal for taking the 2 bolts out of the catch bolted to the actual bonnet using a few wooden wedges to lift the bonnet slightly. I've just done it in 3 minutes and I'm still buzzing. ;)

Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you It's just taken me less time to open the bonnet than it did to read this thread. No chisels involved. The ratchet spanner set has paid for itself again. Cable ordered, car...

You've ordered a new one? You could have had mine. :(

On our Freelander we run winter tyres in the winter and once they get to half worn run them in the summer to get the use out of them. This car does school run on A roads and needs to be 100% On my Disco I just run road tyres and if it's snowing take the tractor or stay at home. A second set of...

Gearbox was shot, so bought one from a breaker and fitted new DM flywheel and clutch as I want D2 to last another 10 years, paid a mechanic to do the job in my shed. D1 levers, new towbar and welded exhaust, new gear lever gaiter and I'm about at £1k. Remap will have to wait, again. :( Little...

Hope so, cost me about £1000. :eek::eek:

Little orange light on dash. :)

Just to help others out, with my small experience. I've recommended to Kyle to spend his money on a D1 range and diff lock lever (if his transfer box has the shaft fitted). Would anyone else agree this is a step forwards? The levers seem to be the same money as a used cable but offer so much...

Just goggled it. £200 from paddock. :eek::eek::eek::eek: I happen to have a cable and lever I've removed to fit CDL. :cool: Message me? Neil

I know it's a D2 but.....

Just bringing this up again. 03 TD4 135k miles, wouldn't go over 2750 rpm this morning, then stalled. After new filter (old one said '02' on it!) and inserting emergency gallon just to be sure, it still won't go over 2750rpm. I've cleaned the gauze in the fuel intake in tank while I've been...

The full works, but now it does seem less likely.

Thanks, I know the aircon works, but changing the dash in the black interior for the one from the light brown interior may be a bodge too far. ebay here we come with the old breaker. Thanks