Search results

I used forever black over a year ago and its still as black as the day i put it on, i bought it for my D-pillars and ended up doing my door handles, the front grill, all the rubber scuff strips around the car, both bumpers, and the running boards, and apart from washing the car i havent had to...

+ one as above, and check to see if you still have the o-ring intact on the plastic bit that pushes into the cam cover hole ?, and fill a small bowl with para or kero and soak the breather filter and oil separator in it too, then blow out with air line if poss or the old ladys hair dryer,

forever blacked the grill + bumpers front and back + door handles, much better.:D

hi all, well last year i changed the ally spigot rings for plastic ones as i was getting this sort of vibrating growl only for 3 or 4 seconds just on initial pull away and then it would disappear, ive had brand new suspension & brand new tyres recently ( not because of the noise, but because...

hi richard, this happend to me a few months back and it was an 80amp fuze that had blown due to a glowplug earth wire earthing out which stopped the pump pumping derv, it was located in the ecu compartment in a black plastic box screwed to the ecu, take the ecu out turn it upside down and you...

black 1997 dse somewhere around 50,000+ miles, its a replacement engine, runs sweet ! :Dps, clock still reads 146000 mls though:p.

congratulations saint, she's a little saint (at the minit) , just wait till she helps you wash the motor, with a brillo pad mine did. bless her.:eek:

like what you did with the dash, looks really well, nice one:)

+1 as above

this may or may not be of any use to you but i had them on mine when i bought it, i know they are very expensive but so are your lights, parked in a supermarket car park, something (i dont know what ) hit & broke my rear left light guard which in turn smashed a hole in my rear light, DOUBLE...

fitted new bonnet release cables £25, and fitted my new drivers door handle £58, job done.

that motors long gone but i did take pics of the injectors on my phone, hopefully they got put on my computer before the phone went missing ill get one of me kids to go through it and see,

black diesel, is old used engine oil filtered and cut with kerro, red diesel, or pump diesel then in your tank and off you go, straight down doom ally, it does work if filtered properly or put through a centrifuge but works best in higher revving engines, not p38s, ill try and put some pics on...

you better check your injectors aswell black diesel did this to my doner motor, they dont rev high enough to burn the carbon left in old engine oil, (amongst other acidy ****) even with fuel additives my injectors had a sandy coloured carbon cone shape growing on them, i was cutting old oil...

the first pic is of your A/C pump with two pulleys and its belt tentioner, dont know what the other one is about, if the car wasnt over heating before ? and its just an air lock its just a case of being patient with it, ive swapped out a water pump once before with no air problems and, a...

make sure the drain on the bottom of the fuel filter is tight, and make sure its diesel and not ATF fluid, on a wet floor they leave a similar mess, your powered steering ressevioure aint that far away from where your looking, mine was leaking ATF and dripping onto two pipes and ran off back...

i was on my way to the auto electricians this morning to have the datatek A/C fan conversion done, and thought id check my oil levels seeing as i did a full service the weekend, pulled the bonnet handle and TWANG! the cables snapped, so eventually got it open, and rescheduled the conversion for...

hi yso, just got in and noticed your thread, have you sorted it ?, and whats your location ?

thanks data::D

what an idiot, the answers right in front of me, loads of people have swapped engines omega to p38 and had to change various things as the fellas have just said sump, f.i.p and so on, but nobody has ever had to change the camshaft, i think job done! (unless im wrong again ?).