Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    Steamy/Oily puddle day before holiday!

    D'oh!! So, sods law strikes again...getting prepped to go on holiday with the missus and go to fill the car up with go go juice and go go gas. Drives fine, nice warm day etc. Start the car at the petrol station and shes idleing at 2.5k so i clunk it in gear and think just get on the road and...
  2. B

    LPG won't switch once warm

    Hi guys, My classic RRC is being a pain again! It will start on petrol fine, flick to LPG and run fine until I switch it off then it will start on petrol fine but won't run on LPG till it has cooled :( checked the vaporiser etc and its warm to touch. Coolants at correct level. Any ideas ...
  3. B

    Vehicle speed sensor for V8 ASAP

    Hi guys, MOT time again so if anyone has a VSS I can buy that would be great!
  4. B

    Replacing solid brake hoses

    take what off ?
  5. B

    Replacing solid brake hoses

    Sorry guys - meant pipe. The rigid section just behind the caliper that run along the axel then up to a joint leading to the flexy pipe. What are my options? just brought abit of hose, cutter + flarer but it seems the ends arent as i expected.
  6. B

    Replacing solid brake hoses

    Hi Guys, Just changed the D/S rear wheel bearing on the RRC and in the process of doing it i noticed the solid brake hose near the calier had a kink in it so as i gently tried to straighten it out... it ripped. How do i go about fixing it? Ive had 2 thoughts, Nip to halfrauds or similar and...
  7. B

    Days tinkering...What to do!

    Evening guys.. In middle of a bearing change and the heavens have opened so ive got the day to clean all the little bits that usually got neglected! Ive got tools, loads of WD40/Duck oil, Loads or carb cleaner, rags etc etc. What bit would you experts be cleaning? Already got the IACV...
  8. B

    RRC Rear wheel bearing

    Dont think it did get especially hot, there was never any heat on the alloy or anything on hot smell. Wheel still spins just grumbles really badly.
  9. B

    RRC Rear wheel bearing

    Hi Landyzone, My rear drivers side bearing is completely goosed and im trying to replace it but cant get the outer bearing out or the hub off? Looked online and apparently is 1/2 hour job but im struggling! any ideas how to get the thing out? has anyone else had problems? am i missing...
  10. B

    RRC Loud Grinding Noise

    Hi Guys, Just when i thought i could class my RRC as reliable it started making noises! The noise is definatley road speed related and sounds like a big bit of chassis has dropped off and is being dragged along the road :( Drives ok but is making a horrible sound. It sometimes is there...
  11. B

    VSS not working after swim

    Yer i suppose - must be something simpilar than that though.
  12. B

    VSS not working after swim

    No air suspension luckily so noo.
  13. B

    VSS not working after swim

    Hi Guys, Now my RRC is working again - think i should fix the speedo. Been through ETM and done the test and got no voltage at the back of the cluster unit but not sure my voltmeter would show the voltage swap from 0 - 12v 6 times per revolution lol. Are there any other tests i can do? The...
  14. B

    Is this worth doing up??????

    Any piccies of the 109/110 Stu?
  15. B

    LPG Experts - Intermitent non-switching

    Hi LPG experts, need some help. My RRC is having fun and games with LPG. Its running fine on petrol but wont flick to LPG. I checked the fuse etc and it was a bit charred so changed it to be on safe side and after 3 attempts - it fired and idled on LPG for about 3 mins. Idled perfectly, reved...
  16. B

    tow straps

    Where abouts in crew are you mate and are you open to offers?
  17. B

    one week to get this done!!

    Looking good mate! Any news on which motor your using yet?
  18. B

    Starter motor - cant get the hooker out!

    Id prefer to but finances are tight. Theres also a good chance a new battery will be required today :(.
  19. B

    Starter motor - cant get the hooker out!

    Motors out :) lifted the car a few inches and the thing just fell out on to my mat. Tested it. Motor wasnt running at all through the solenoid and was slow and sticky when the solenoid was bypassed. took her apart Polished all the bushes, faces and friction places. BIt of copperslip on the...
  20. B

    Starter motor - cant get the hooker out!

    you got any spare i can nip over to Alty and pick up mate? Mite need to do an IOU though?
Back
Top