Search results

I am being driven mad as I have the plug which has green and black wire attached which runs to the pump for the screen washer but I just can’t find the end that it plugs into on the loom. My washer bottle is not original and cable has been extended. Would the original have been in the passenger...

Ok , I need help as I am going around in circles now. I have two problems now which are when the hazard switch is in the off position this then connects two cables a green one and a green and yellow one. I have come to the conclusion one of these should have 12v which then goes to indicator...

Just picked a Freelander 2 and the garage fitted two new tyres on the front and I seem to remember reading somewhere that if you are only changing two tyres you should always fit the new ones on the back is this correct for the Freelander 2? I have tried to search but only found one thread and...

Could someone tell me where the chassis number should be on an early classic range rover? Is it in the same place as a series land rover? Thanks

I have just picked up a Series 3 which has the wrong engine on V5, so my question is it is listed as a 3300 diesel ( perkins I guess at some point) but it actually has a Ford petrol 2.8 fitted should I tell the DVLA when I send the V5 off as I have all sections or will that open up a can of...

One of the supports that runs across my 110 has completely rotten away and fallen off, will this fail an MOT for this and is it possible to repair / add them back in? The only parts left is a small amount that is attached t the chassis, this is one at the back. Sorry about picture hard to get...

The gaiter around my gearstick on my 110 had gone hard and every time I changed gear it came out so I thought I would order a new one. New one arrived in "the blue bag" and although much softer it just doesn't seem to fit very well it seems a bit too long. My questions are:- Is it one size fits...

Defender 110 broke down today help needed please. On my way home I lost drive but I managed to slowly drive it home with diff lock on. As it was dark couldn't do much or see much apart from I did notice that without diff lock on the front prop was spinning away but not driving the wheels - does...

Can anyone tell me if all side/rear windows on 2 door classics are the same i.e will windows from a late eighties car fit in a suffix A car?

Help, I'm going round in circles the sender keeps leaking and I have bought a new sender, now O-Ring and new retaining ring nd it just keeps wheeping. Is there a knack or is there some sealant I could use? Could I knock over the flanges on the tank to tighten things up? Any help much appreciated.

As some modular wheels and tyres came up for sale local to me at the "right price" I bought them not thinking about external diameter. Now I have swapped the wheels over I have noticed that due to tyre profile the external diameter is about two inches smaller. Does this mean the car will be even...

Can anyone help, I don't have a parts number manual and I am trying to find part numbers or replacement interior door lock/opener and door pull handle (drivers side). Hopefully the link below takes you to picture of what mine should look like? The door locks look similar to the ones used on...

Now I know I'm going to get fit a "tdi" and all the other comments and I have searched but they are all old posts so here goes. I have a Nissan FD35T engine fitted has anyone found out where to buy things like oil, oil filters, injectors etc from or even a manual would be even good. I would...

Now I know I'm going to get fit a "tdi" and all the other comments and I have searched but they are all old posts so here goes. My Defender has a FD35T engine fitted has anyone found out where to buy things like oil filters, injectors etc from or even a manual would be even good. I would like...

Now I know I'm going to get fit a "tdi" and all the other comments and I have searched but they are all old posts so here goes. My Defender has a FD35T engine fitted has anyone found out where to buy things like oil filters, injectors etc from or even a manual would be even good. I would like...

Just got a refurb kit for my brake cylinders see below and I have no idea where the one on the far left goes. ( I have the drum drakes that have two cylinders per wheel. The middle one goes around the piston in the cylinder and the far right is the dust cover on the end but the first one? Is it...

I have a similar problem to the other post, I have rebuilt my brakes and the rear ones work fine but the front don't work until I pump the pedal about three times, then if I leave it five minutes it will need pumping again! I have bled the brakes for hours and there doesn't appear to be air. I...

I know this isn't a Range Rover but I also know there are some really good engine guys who look at this section as I have a Suffix A and they have been helpful in the past plus the engine is the same :-) The series 3 I recently purchased has a rover V8 transplanted into it and it's been a...

The series 3 I recently purchased has a rover V8 transplanted into it and it's been a wiring nightmare as it was never completed by the previous owner. One of my last issues is the oil light will not go out (at all) so I have a few questions. It looks to me that the switch is "closed" on start...

Just purchased a series III lightweight and would like some help with some part numbers or help where I can find numbers? They are all bonnet parts for spare wheel. Centre U bolt thing that wheel fits over (sorry don't know proper names) Strap to hold on wheel three off (strap staples) that...