Series 3 Part Numbers help required? Lightweight

Just purchased a series III lightweight and would like some help with some part numbers or help where I can find numbers?
They are all bonnet parts for spare wheel.
Centre U bolt thing that wheel fits over (sorry don't know proper names)
Strap to hold on wheel
three off (strap staples) that strap attaches to.
Mine also has rubber bonnet catches that hold it down but I'm guessing these have been added

Any help much appreciated, it may be cheaper just to get another bonnet!

The std S3 manual doesn't cover the military lightweight. I know the parts you refer. Take this over to military part of the forum. Check threads on lightweight stuff. Worth checking Craddock website and others. Some parts are unobtainable but not sure which. Good luck.

John S said:

The std S3 manual doesn't cover the military lightweight. I know the parts you refer. Take this over to military part of the forum. Check threads on lightweight stuff. Worth checking Craddock website and others. Some parts are unobtainable but not sure which. Good luck.

Click to expand...

I have listed this in the military part of the forum as well but it doesn't seem to be so well used as this section so I thought I would list it her also as some one may have come across them whilst searching for other parts, Thanks for your reply.

Is the centre U bolt the same as the one that goes on Rear door wheel carrier. If so you can have this one for the postage.
As in pic below

Blackburn said:

Is the centre U bolt the same as the one that goes on Rear door wheel carrier. If so you can have this one for the postage.
As in pic belowView attachment 96613

Click to expand...

Blackburn, It doesn't look the same but as I am having a hardtop on it maybe I should just mount it on the back door anyway as it will save all that weight on the bonnet on the "off chance" I need to look under the bonnet. I think you've pointed me in the right direction as I was blinkered on fitting it on the bonnet, many thanks