Search results

Just incase anybody is following this thread. We ended up wiring the thick green/brown to permanent live feed, and the white/green to switched live. Earths ran through the original loom. Coil stayed connected to the loom as it came out just needed earthing. Could not find a power output for the...

Hi all, Its been a long time since my last post but i am truley at my whits end with looking at wiring diagrams and hoping somebody Can shed some light on a problem im having. We are currently converting a 110 to 3.9 v8, this is a conversion i have done before and followed the wiring diagrams...

Sorry bit out of my price range

Wouldnt have thought so may be ask them and see where that takes you let me know

Log book ?

How much

Updat bled system again all is well untill I drive it then cold again I undid the bleed screw and all that comes out is air bubbles for 20min plus and what looks like little copper coloured shavings

How much for the floor only

Ok whats the hg like to do on these

Well replaced the rad today and bled the system it was a no go untill i revved at 4000rpm and heaters where red hot left to idle and stayed hot rad was also hot all over went for a drive 2 minutes later went cold rad at this point is cold got home 4000rpm again and heat came back hoses are still...

Did the 265's catch the body anywhere was yours a gs or s spec ? Did you trim the body at all

Great job

Mine came with a set of brand new genuine landrover water prooof seat covers loads of mot and tax a bar with spots 125k new tyres full dealer history air bags removed ace removed dog guard rubber mats in nearly mint condition in light gold i love it but need to get to the bottom of this problem

I bought mine for 1k knowing about the problems but i thought even if i were to spend 500-600 on it id still have a cheap td5 thats had everything done think im going to do rad and cap this weekend ill update again soon

Would you say your symptoms where exactly the same as my first post would be crap to replace all that and still have the same problem straight after ive bled the system all seems well for a little but then all the pressure comes back mine has done 125k

Did the rad cure yours ? Did you have same prob as me ?

Gupdate incase any one is reading. Pulled the stat out again today just to test and it worked fine the pulled water pump out and all is well there. I filled the rad with boiling water from a kettle and only the side attatched to the top hose got warm the rest stayed cold after putting 6 litres...

Ran to temp still no joy and I put a hose through the top of the rad when flushing coolant out because it was pink and I wanted to replace with blue. Water ran through the rad easy enough I think

Update i replaced stat today bled system as per rave manual still the same the top hose is red hot and pressurised the bottom of the thermostat housing is also hot the other side top of housing is cold the entire radiator is cold pretty much the only hot place is the top hose

What did you do with the 18" alloys in the muddy pic ?