Discovery 1 boot floor and repair panels

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Brian S

Well-Known Member
Posts
2,886
Location
Braintree, Essex
Hi.

Now I have scrapped my old Disco I have all the parts I brought to repair the boot floor that I no longer need.

I have:

1 x Boot floor
1 x rear repair section (goes along the boot near the door and is where the clips to hold the trim panel sit)
2 x Side repair sections (Only the lips, not the whole side floor)
3 x sections that fit under the floor from side to side. (one basic panel and 2 more complex panels including the one the brake lines go through)

I also can include some metal panels in the same material for patching and repairing.

This lot cost me nearly £200, its all brand new and I would take £150 the lot, including the spare metal sheets.

Collection only from essex, but might be able to arrange to meet somewhere if it helps.

Thanks

Brian.
 
Would you consider splitting?

Am interested in Side repair sections and maybe 3 x sections that fit under the floor.

What would you be asking for these if agreeable?

Would you mind a courier collects?
 
If I split it then:

Side repair pieces x 2
3 parts under the floor

£90

Repair part near the door. £20

Boot floor. £50

Would prefer collection but the repair parts are long and thin so should be easy enough to wrap in cardboard and brown tape. Can get a price for carrier and arrange it as I need to do it on a day someone will be home all day.

Would rather not send the boot floor. It would not be wrapped and in don't want responsibility for carrier damaging it.
 
Hi Brian if you still have all these panels by next Tuesday could you give me a pm and dimensions of the largest panel and post code where it's to be collected that, would be great if you could.

Very interested in having the lot from you thanks, nick
 
No problem Nick

I presume you want to send a courier to collect?

I don't mind, I can tape the bits together with some cardboard round the sharp edges. I won't be responsible if the carrier bends anything though. :)
 
No problem Nick

I presume you want to send a courier to collect?

I don't mind, I can tape the bits together with some cardboard round the sharp edges. I won't be responsible if the carrier bends anything though. :)

Well if my land rover clutch repair bill on Monday isn't too bad I'll have the panels off you, I can collect but would prefer to take my car (not landrover) if they will fit.
If all is well would a weekend collection be ok? I can always send a deposit to you.
 
Hi Brian thank you for your time I really appreciate it, unfortunately I won't be able afford the panels, just had cam belt, followed by a unexpected clutch problem and puncture! On the disco then to top it off the clutch has started slipping on my other car, you know how these things go! :mad:

As I said I really appreciate your time, good luck in selling them :)

Nick
 
Back
Top