Search results

I see but if both diffs are changed for the same ratio all will be ok? And are the ones I would need be 3.54 10 splines? Cheers jonny

Sorry to ask a stupid question but why would it break the box in 4wd?? And what would be the fuel compsuption after the mod? Many thanks thinking of this swap myself

Hi all I was looking to sort my landys ( 2.25 petrol ) oil leaks out and the worst one seams to be from the front bottom pulley crankshaft, is it a simple job? By that I mean pulley off seal out new one in or more complexed? Many thanks jonny

Cheers for the reply I was just looking into it as an option, I have also read up on having to get it certified for safety and ins reasons, I do all my own gas work as I'm gas safe registered ( old corgi ) I did a search and couldn't find any that had done it on a series and wondered why? Thanks...

Hi all looking into the pros and cons of fitting lpg to the swb series 3, a couple of questions has anyone done this on a budget? There are a few kits from different cars on eBay will any of these fit? Can any lpg tank be fitted under rather than inside with brackets made to suit? Many thanks jonny

I had this on mine I had all new lights and indicators all round did my nut in turned out to be an earthing screw in one of the indicators on front wing try all of them

My cd with iPod connection is fitted underside the cubby box lid ( outa sight;-) ) the speakers are shelf mounted ones two above little windows on rear of Landy and two smaller ones fitted just above ear level behind driver/passenger seats so don't have to have it belting out to hear it also...

Hi all ive done a search but cant seem to find the post about this?? someone on here had done it and it pics too, ive won a su to weber fitment elbow off ebay and need to know what size su to go for and jetting advice too many thanks jonny

oops yes should of said "thieving scrap collecting transit tipper driving scum" that had my car spitroast jig away from out of my garden :mad: sorry for any offense caused

many thanks all for the replies, i was going to make one myself i bought all the steel to adapt a trailer i bought for my scooters but would rather not have it as its more things to store and lock up so gypo's dont have it away. will have a good look into it now its got the green light cheers again

Hi all i was wondering if a series 3 88" would be ok to use with a motorcyle carrier the type that motorcross and trail bikers use? would it need stronger springs on?? it would be carrying a scooter many thanks in advance

i did but as the indicators have 2 wires one feed one earth i checked that under the bonnet and it was ok so didnt think about earth screws????? :confused: just glad its done i missed it :)

Cheers for replies finally found it :) there was a nicked wire from ind stalk that was shorting fixed that but still playing up finally finally found it earth screw on o/s front indicator bloody hell 2 mins it was done lesson learned check them first next time

yeh it certanly points that way ive been on wi it 6 hrs trying stuff, the ind stalk apeard ok contacts were all clean and none stuck??? ill have another play tomorrow in the light cheers jamesmartin

Hi all got a prob with the series 3 petrol, put the lights on the other day and the fronts didnt come on striaght away while i was out checking rear they did come on so today i thought id have a look. Heres where im at if i put side lights on they all work if i then put indicators on rear are...

many thanks for the replies guys, i think its running weak as when going down hill and its popping if i pull choke out a little it stops????? is it a case of bigger main jet???? cheers jonny

cheers pobby i will look into that :)

Hi all series 3 petrol with a webber 34ich carb i know landrovers have a pop now and again but mine seems really bad popping all the time on over run and stalls once warm at juctions/roundabouts. I have done a service on ther carb using genuine webber kit, new in line fuel filter ( old one was...

cheers for the reply yes it does move but just a tad, ive got a carb service kit so will change diaphrams and other bits then see how it is regards jonny

Hi all i have a 2 1/4 petrol series 3 with a 34 webber carb fitted, the problem is when choke is pulled out and i start it ( which it does ) it seems to be running with no choke but the flap is working??? cars i have had before with manual choke will rev highher while choke on but the landy...