Search results

Hi, I also had this problem of draining and due to the help of these guys I disconnected the receiver. Problem solved. I leave it for 3 to 4 days at a time and it fires up no problem at all. The only down side is that I have to stand close to the vehicle to lock or unlock. Good luck

so i take the dryer apart remove contents and replace with these? cheers

would the air dryer be an item that would need changing at this time? cheers

i think its original as i havent changed it in the 8 years I have owned it. I dont think they are expensive. is there a particular source for these? Thanks for the advice

the drive box is the black square one at side of block??????? cheers

Cheers ill check the filter. How can I check the sensors? Thanks guys

HELP I always get help from you guys when I have a problem. My p38 diesel has been great for ages until now. My problem is eas related. When driving the eas lights will randomly go to the highest setting and all the lights come on indicating eas fault. the car remains stable but requires...

nice motor

hi I had the same problem with the sotware on my p38. I was running it on windows 7 and i tried the process lots of times with no joy. I then posted a query on here and someone told me there were issues with vista and windows 7 . So i got the old lappy out which is XP and hey presto it...

Waheyyyyyyy Problem sorted. Reverted to my old laptop with windows xp and it worked first time. 2 faults came up and was cleared straight away. Good old XP Cheers Tom

hi yes i got good idle faults wer lots of air leak valves closed can remember now but a whole list came up. i pressed the buttons in the required sequence, closed the programme then turned ignition off and unplugged lead. then turning back on fault was still there. its sooooooo...

Hi guys I have a 1998 p38 diesel. I also have a eas hard fault. I have the obd lead and the software, I have followed the instructions but cannot seem to reset it. It keeps coming on eas fault 35mph max. I am running on my new laptop with windows 7. HELLLLPPPPPPPPPPP thanks tom

I had loads of problems with my 18 inch hurricanes. went to several tyre experts without success . I found out that they needed to be balanced on a machine using "haweka" plate adaptor ( i think that was the name ). I found a tyre place that had one and he showed me the 4 wheels balanced...

i cant seem to access the photos or my gallery any ideas? cheers tom

PCD = pitch circle diameter.

It may be a bulb.... but more likely to be one of the "optic feeds" to the area. the bulbs feed light down these to the certain areas. when you take it out you will see what I mean. Make sure they are seated properly and everything wll illuminate fine.

had a similar problem last year. took it to a diesel pump specialist who "tuned" it as good as he could. wow wot a difference. he also said change the fuel filter regular as this is also a common problem. he charged me @ 80 quid as opposed to 700 for a new pump. tom

I had the same problem... fuel pump sorted it... been fine for 18 months now...

I just thought i would share my overheating woes with you. Driving into Manchester last week I noticed the temp gauge creeping up. I pulled over and waited 15 mins for it to cool down. Not far down the road it creeped up to max and the red light came on. I pulled over again and checked the...

Hi Try Wildes they are in manchester and mine is in there at the mo. I have used them for 20 years. Phone Fran on 0161 223 8775. Gud Luck