Search results

Ok so couldn't see anything around the fuel cooler, so took it to the garage to be pressure tested in a hope that would show where it's leaking from. Diagnosis is the core plug at the back of the head has failed. Is there a core plug there? Can it be changed in situ?

Socket head bolts cut to length always work for me, makes it so much easier next time

Thanks guys I will check it out It does leak more from the bulkhead end, it is dripping from somewhere, on to the bell housing, and off that onto the floor via a cross member. I did breifly inspect the fuel cooler and couldn't see anything of concern, it looks to be to far forward for my leak...

Bit of a long shot, bit do you still have this?

Hi guys, Bit of a story with this one. But now I'm stuck, need help please as I'm outta ideas. 2000 td5 discovery. Started leaking water, looked like a good trickle dripping from the back of the engine, but couldn't pin point it. On inspection looked like the heater hose (inlet?) Had been...

Swapped the stalk and all is well again! Thank you for you help. :-D

Thank you very much, is there any chance you could post it for me please as I can't drive to you unless it's left turns all the way!! Lol. I can pay for the postage Thanx loads:):D

How much pls mate?

Would this be common? is it possible to check before buying a new stalk? Thanks for your quick response, any suggestions on the best place to get a 2nd hand stalk - Bit of a newby with P38's

On my way home yesterday noticed the right hand indicators weren't working at all, no clicking, no tell tail light and no indicators! left hand work fine so assumed it must be a fuse or something? looking into it there isn't a fuse for the indicators, they look to be controlled by the BECM is...

Not sure if this is in the right place? Looking for a few bits for our discovery 300, Would like a tan load cover, drivers tan leather seat base and a front a bar, and grey & silver two tone freestyle alloy. Any one got any of these bits???? Cheers Steve

What would it look like? (maybe a stupid question)

So there is a take off on the turbo to connect this pipe back to?

So there is a take off on the turbo to connect this pipe back to?

So if i wanted to do away with the egr valve and swap the pipe(already bought it) where would this pipe go to? back to the inlet manifold?

just been looking before i install the obligatory EGR valve removal kit and replacement intercooler pipe. Looks like a previous owner has made a bit of a modification, there is a vac pipe comming from the top of the fuel pump round the back of the head and into the intercooler pipe. Now when i...

anyone done it?:)

I just follow the procedure on the first page get to the point where the horn beeps and press and hold a button on the remote . . . And nothing?

hi, i have now bought two LUCTXTJ1 remotes which i am told are 433mhz, but still cant get them to program up!! what am i doing wrong???

Hi all i have now bought 2 LUCTXTJ1 remote which are meant to be 433mhz, i still cant get them programmed in ! what am i doing wrong????