Search results

Morning, Bought another one, anyways... Enough of that. Theres a little white wire coming from the part of the loom that also has the small red wire that goes to the starter motor. Its a white wire with brown marks on it. Its hanging loose and i dont know what its for. Can anybody help me out...

Selling the Disco, looking for a pre 90's 110 or CSW V8 - Get in touch if interested. Thanks. 1997 LAND ROVER DISCOVERY V8I SILVER - MANUAL - LPG & FSH - 96K - | eBay

Just fitted hedman headers and the obvious decat Y pipe but still has lambdas installed in both sides. Now before i did that it was running fine on both petrol and gas with power pretty much identical. Now it goes like **** off a shovel on petrol and is absoloutely ****e on gas, done 50 miles...

All the threads on the web on hedman hedders etc and not a single one of them tells you the stock manifold bolts are too long.. Tightened the 16th and last bolt after wrestling with the nearside header for 20 mins trying to get it in place and realised these bolts are too long. What a f*ck up...

Anybody done this, seen a DIY thread on this or have any ideas about this ? My LED's are a pain in the arse, sometimes they work, sometimes they dont. I would love an electronic lcd gauge that tells me whats left, like 46% remaining etc.. Or a mechanical meter of some sort in a dah pod...

Got the 3.9 out on the road today for the first time since i bought it. Hesitates throughout the rev range under full throttle whilst running on petrol but still gets up the rev range failry decent but its definitely holding back somewhat. Filled it up with LPG, runs much better but the...

After a good A Bar for a Disco 1, preferably a close fitting chunky one that will accomodate two decent size spotlamps. Thanks.

So all the threads say go genuine lucas or you may aswell bin it.. Seeing as its as readily available as rocking horse ****, im just curious as to what others do when they need a new cap and rotor arm.. There seems to be a "red rotor" remodelled on the old lucas design, available from...

Noticed a little fire damage near the airbox today, the airbox is damaged, the air filter is slightly burned, the power steering resevoir is partly melted and the wires going to this mystery part are slightly melted. What i want to know is what is this part hidden in the circular hole with the...

Ripped all the back out today, only had the car a short while, not got it on road yet. Was removing the dickie seats and belts... Also have a puddle in the passenger footwell, ripped the carpet and sound proofing out (literally), big rusty puddle, im unsure what it is as the header was empty...

Sold

So i fitted a 2" britpart lift kit, my 6 year old reckons its sagging on the drivers side but i say shes imagining it, am i lying to myself? Anyway, after removing the original rear coils which were badly corroded and looked factory items. I questioned what would hold them in place when full...

If your after brighter rear lights, or your small twin bulbs keep blowing when your missus slams the back door, remove the lens and bulb holder, get some wire snips and snip the plastic into one large hole which allows the fitment of twin "larger" bulbs that are brighter and dont seem to blow as...

Has anybody else removed the middle and rear box on a D2 TD5? Ive had a straight through centre section on for a month or so and have just hacked the rear silencer off at the pipe to silencer weld, Its a little too loud but sounds good. Can anybody reccomend a rear box that i can weld on to...

Anybody fitted bog standard 18's from a L322 to the Disco 2 without this "wheelnut and spigot kit" that costs more than the damn wheels and tyres? Seems a bit of a con, especially as i cant afford it. Have searched but havent found sod all relating to fitting them without the spigot kit except...

Ok, so bit of a misleading title to grab your attention. Wheres the best place in a Disco 2 to fit some 6x9's ? I have a decent set of 6x9's and some speaker wire, My rear speakers are cabbaged and my fronts are taking the brunt. I dont want to buy little round ones for the doors, I just...

Will a Dastek Piggyback ECU from an automatic be good to go in a manual TD5? I know other brands of powerbox's are good for both trannys but dont know about the Dastek. Thanks.

Drove through some puddles today and fanbelt went squeeky, still a little noisy but it will dry off, parked up for an hour or so, i just nipped the shop in the car now and when i started it the engine light stayed on for approx 2 seconds after startup and then went out, didnt do it when coming...

Have installed a Kenwood W6027 that was working perfect and has been for the last 3 years in a variety of different vehicles. Fitted it to the Disco2 with a brand new ISO harness.. No power to it at all...... Reinstalled the standard LR tape deck, Works fine.... Im at a loss. Fuses are...

Every time i sell a LandRover i say to myself, "never again, too much hassle, too slow, too heavy on the juice... " Sold my Fender earlier this year and I said, thats the last time i buy a pink LandRover, I don't mean it this time," I said to the missus.. Only just gone and bought another...