Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. johnny curt 1

    j series engine bits for sale

    I got 2 sets of j series injectors up for grabs they fit the 10j / 12j / 15j and 19j diesel engines both sets in old but bloody good clean condition tested and give a nice fan pattern £60 per set of 4 also a full set of cam followers with the rollers and in the collars with retaining bolt no...
  2. johnny curt 1

    Rumble at rear when going round corners

    put yer missus in the back and the dog in the front if the rumble changes to a moaning sound its an easy fix dont take either out in the tratter again :D:D:D
  3. johnny curt 1

    Fuel getting everywhere but wont start without help :-(

    yer best bet is the carb off an old sierra a webber 32/36 DGAVV theyre endlessly easy to tune up and mess with and so simple any bugger can suss them out
  4. johnny curt 1

    Defender Stolen Sheffield City Centre Late 6th Jan / Early 7th Jan

    as i did when i rebuilt my tratter exept i stamped the chassis number behind the door locks on all doors on the back lip of the seatbox under the rear wheelarch on the rear tub the under edge of the roof gutter the top edge of the windscreen frame and the bulkhead behind the main dash pannel...
  5. johnny curt 1

    Series 3 Petrol will just not start

    if its a webber 32 36 DGAV twin choke carb itll be where the fuel line goes into the carb it has a tiny filter in there and a return pipe on the opposing side and a brass nut / bung on the top ....chances are its the fibre washer under that nut just letting a tiny bit of air in allowing the fuel...
  6. johnny curt 1

    what's missing under the bonnet

    just go to the scrappers and get the boot lid seal off an old mondeo or escrot or something itll cost pennies and use an old door seal for the sides of the bonnet and self adhiesive draft proof strip from wilkos on the top of the grille pannel
  7. johnny curt 1

    fuse box cover

    are we talking the fuse box cover on the ignition cowling
  8. johnny curt 1

    A serious case of 'Flatulance'

    them rear springs look like theyre from the neolithic period and the brake drum could be possibly early iron age :D:D:D
  9. johnny curt 1

    A serious case of 'Flatulance'

    typical of an ex MOD series to require a member of time team to get the brakes working :D:D:D:D
  10. johnny curt 1

    valve spring compressors

    if your doing this with the head off it shows dividence to check the primary combustion caps for damage such as being burned to a crisp or cracked round the ports if they are replace them and get the head skimmed ( youll be amased at the difference it makes to the engine running ) if yer...
  11. johnny curt 1

    Aldi Tool Bargains......

    bout 2 years ago me mate bought a mortice machine from aldi as a sort of stop gap till his business takes off enough to be able to upgrade to a semi industrial one in the last 2 years its trenched out on average 20 table legs at 4" doing a 22mm trench evry day till last tuesday when it finally...
  12. johnny curt 1

    Alternator help, charge light

    could verry well be a break in the wire where it goes towards the bulkhead past the manifolds ( the heat makes the wires brittle )
  13. johnny curt 1

    johnnys series 3 resto project

    shes now up for sale boys n gurls with a new full MOT :D http://www.landyzone.co.uk/lz/f59/johnnys-rebuilt-series-sale-237994.html?highlight=johnnys+series+sale
  14. johnny curt 1

    Which Oil Seal Manufacturer?

    it would have to be a coin toss heads = bearmach tails = allmakes should the coin land and settle on its edge ..........get a genuine landy or freightrover one just dont ever fit a britpart one i fitted a ****part one to a 12j diesel engine i fitted in me series and the seal...
  15. johnny curt 1

    WTF is that Dave?

    fer gods sake i cannot believe that any garage or dealership could let anything be sold in that state when i bought me series i bought it as scrap fully knowing it was either me or the crusher but still it was in a safer condition than that and now im selling the series on and heres me...
  16. johnny curt 1

    razor bonnet refurb.

    if id had the money the only thing i would have done different is buying the pre made replacement frame either complete or in parts rather than fettle about with making my own to suit ;)
  17. johnny curt 1

    razor bonnet refurb.

    forgot to mention me **** hot tip fer removing the old rivets from the inside use a bloody good sharp wood chisel to pop the rounds off the rivets but do this on the frame side of the bonnet not the top side as not to leave any ghastly marks on the finished article ( basicaly chisel the head...
  18. johnny curt 1

    What vintage is this steering column?

    any later austin steering wheel will fit that spline such as metro / montego / maestro / some later minis and somewhere ive seen a ford cortina steering wheel on a series 3 before now
  19. johnny curt 1

    razor bonnet refurb.

    ere wickford 90 thought you might be interested in having a gander at these things the propper tools for rounding rivet heads Rivet Snaps and Set up
  20. johnny curt 1

    absolutely sick to the back teeth of it !!!!!

    ive only done this bit of fettling as im one of those people who have bought a wrongun sooo many times in the past ( like when i first got this un ) and wished i hadnt :mad: im always determined to never sell a vehicle full of problems :D i just couldnt sleep at night knowing id sold a...
Back
Top