Search results

Well that's a good idea for the alternator so I'm half way there !!! thanks for that.

Thanks for that. It's a factory 200TDI LHD but as I'm putting in the ZF everything moves forward, so it's not a problem on a RHD but the LHD clashes. A 300tdi would be fine though but I have a 200tdi and a ZF from a 200tdi Disco.

Thank you for that. I'll scoot over there and have a look. :)

Hello there, I have a 1993 200tdi Defendet and I need to move the power steering pump higher up. She’s a LHD and I’m putting in a ZFHP22 and with the engine moving forward the pump interferes with the steering drop arm. Thanks in advance for any help.

Will do. Thank you very much for that.

Thanks for the fantastic help. As a temporary measure I’ve spliced in a supply from the F28 fuse to SLABSC0504 Pin 1 and all is good at the mo. I hadn’t seen your idea about the Fusebox before doing this so hope F28 is only for that Pin1 wire. At least she is no longer a Christmas tree Thanks...

Good power to the yellow and after plugging it back in I got power to F28. I’ll check to see if I disturbed any of the plugs behind the fuse box and if still low volts at the Wabvo I’ll splice in a fused power line. Plan A anyway

That’s fantastic, thanks for that. I’ll check it out tomorrow.

I wonder where I must have broken the circuit...!!!

F11 was good, I´d checked that before but F28 was new to me and it´s getting 0V.

Well interesting readings I think. With ignition on; Pin 1 7.9V, Pin 2 11.9V. With engine running Pin 1 9.4V I hope this means something to you...!!! and thanks again for all the help.

I must have disturbed something....damn. Did I mention the handbrake warning is also staying on. I can get rid of it temporarily by going into the SLSABS but it always comes back. This just started with the constant ABS light after I had spliced in the new wire.

Well F28 is also fine. Too late now to do any more. I can check if there´s any power on it tomorrow.

Sorry, missed your 3 Amigos point. Yes all lights are on for the ignition test. F11 is fine and I will check F28 when I get home tonight. A few weeks aho She started flashing the engine check light once and then the hazards would start flashing. Engine would still run though. So turn off, exit...

No 3 No 3 Amigos this time, my old friends !!! The battery voltage in the SLABS is 13.8 and the ECU Internal Supply is 0. Mmmmm, I have just spliced in a wire from the engine fusebox to the IDM and maybe have disturbed the ECU/ABS power supply. Any ideas ? and thanks for all the help do far.

Yes

2000 TD5 D2. ABS light on

Hello there, My ABS light is constantly on and I get the following Nanocom error message:- 02-01 no battery supply voltage 02 times The ABS fuse is OK and the Hand brake warning light has also come on. When I clear the Error Codes the Hand brake light will go away but not the ABS and after a...

Spot on, now everything is working. Thanks for the explanation and the tutorial, really appreciated.

Ah ha, now I see. I’ll cut the wires, check resistance and try again, Thanks a lot, hopefully this is it.