Shuttle Valve Switch 11-05 from NanoCom

My 2000 TD5 auto Disco 2.
A strange one, who would've thought it. My ABS light came on and the Nanocom told me it was the shuttle valve electrical fail. So I did the wiring mod and now I get the message ´11-05 shuttle valve electrical fail 011 times´.
No matter how many times I clear the fault with the Nanocom I get exactly the same message recurring. Even after taking her for a short run its always the same message. Any help is much appreciated, thanks in advance.

The warning light is still on? If yes how did you do the wiring mod? by splicing into the switch's wires or cut and prolonged them? also did you measure the switch's resistances?

sierrafery said:

The warning light is still on? If yes how did you do the wiring mod? by splicing into the switch's wires or cut and prolonged them? also did you measure the switch's resistances?

Click to expand...

Spliced the wires in and I didn't measure the resistance Took a chance of course. I find it strange the error code is just the same and it keeps on coming with 011 times. Presuming its significant but what does it all mean....if anything.
Thanks for the help.

and yes the ABS warning light is still on.

The error is the same cos you didnt fix anything by splicing into the faulty circuit and letting it in parralel with the bypass unless the switch pack is bad .So you'll have to remove the switch pack again and measure the resistances and if they are OK you have to cut the wires to the small connector cos splicing into them is not OK. Those who posted tutorials with spliced wires were lucky as teh fault was not a short circuit, see this https://www.landyzone.co.uk/land-rover/shuttle-valve-modded-but.356585/#post-4783360

Ah ha, now I see. I’ll cut the wires, check resistance and try again, Thanks a lot, hopefully this is it.

Yes, provided the resistances are OK, correct tutorial attached...except that additional connnector which IMO is futile

Spot on, now everything is working. Thanks for the explanation and the tutorial, really appreciated.

Welcome and well done