Search results

1 piece of flexi, do away with the solid section :)

Hi Guys Just wondering if anyone has ever removed the housing for the diesel pump? I've removed the BMW fuel pump as it didn't work on my rangey, but as the bore on the pumps are different I'll have to rebore the housing to accept the range rover pump :) Anyone done it? Looks easy but...

I can probably get some braided ones for you? sorry not meaning to trade but my company works with a stainless steel braided hose company :) Dan :)

I went through the same process Tony and came to the conclusion that you can't uses 525 pumps, I know many have but I had the same issues as you :( I'm now re-fitting a range rover one on but have the rebore the BMW engine casing as the range rover pump had a bigger bore than the bmw pump :(...

Am I under the illusion that tyre pressures should be based on the car and not the size of your tyre? After all it's the weight of the car that the pressure is sorting out :)

Hi Guys I know there is a classified section but it seemed to be more land rover specific than range rover. Anyhow I'm after a good working Injector pump for my 1997 2.5DSE. I want an original rangey one not a BMW/Omega one. Anyone got a spare? Cheers Dan :)

Hi Guys Cheers for the info :) I have a syncmate so no worries there. and am keeping with the original P38 ecu :) I have no issues with changing the pump can do it in under an hour start to finish :) Will carry on searching anyhow, I just want my Rangey working :(

done a search but didn't get a definite answer. I know the 525TDS engine/pump I tried didn't work :( the pump wouldn't inject fuel :(

bumpety bump :)

you can get special blanking plugs from most motor factors chap :)

Hi Guys Having real troubles with my fuel pump on my range rover, needs rebuilding we think. Does anyone know if the Omega one will work if swapped over? I know some of the BMW ones won't due to immobilisers and different flange size :( Anyhow if anyone could confirm that'll be...

got the tools, so no worries there :) Cheers Wammers :) Dan :)

Hi Guys Does anyone know if they P38 injection pump (mechanical) is interchangeable? I have a sync mate so can resync them, but are there any other side effects from swapping a pump over? Cheers Dan :)

one way to find out lol. Why is nothing easy on P38's :rolleyes:

no worries, contacted a mechanic friend who has a couple of thousand £ snap-on one which should work :) Cheers Dan :)

I take it I can plug my P38 into a fault code metre then? Dan :)

Hi Guys I have now managed to get my 2.5 DSE to run after doing an engine swap (had to bleed the injectors a lot), but now she won't rev at all. I am idling at about 600rpm, and when I push the accelerator pedal nothing happens, not even a 1rpm change. Any ideas? I need this working by...

I can see the odd bubble which heads towards the filter when the system has finished priming, will try bleeding tomorrow (need to charge battery :() Cheers Dan

in tank pump is good as I can see fuel going to the main diesel pump :)

Just checked the solenoid with a 12v feed and no difference, I can hear it click when the ignition initially is turned on, and then it clicks again when the ignition is off :)