more diesel problems :-(

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

p38 dan

New Member
Posts
28
Hi Guys

I have now managed to get my 2.5 DSE to run after doing an engine swap (had to bleed the injectors a lot), but now she won't rev at all. I am idling at about 600rpm, and when I push the accelerator pedal nothing happens, not even a 1rpm change.

Any ideas? I need this working by Wednesday as I'm going to Le-Mans on Thursday and would love to take the Rangy :)

Cheers
Dan :)
 
p38 dan said:
Hi Guys

I have now managed to get my 2.5 DSE to run after doing an engine swap (had to bleed the injectors a lot), but now she won't rev at all. I am idling at about 600rpm, and when I push the accelerator pedal nothing happens, not even a 1rpm change.

Any ideas? I need this working by Wednesday as I'm going to Le-Mans on Thursday and would love to take the Rangy :)

Cheers
Dan :)
Click to expand...

Throttle is fly by wire from position sensor on pedal to ECM. Think it needs to go on giagnostics.(copyright 2010)
 
Last edited:
p38 dan said:
I take it I can plug my P38 into a fault code metre then?

Dan :)
Click to expand...

Sadly no, unless it is one designed to work with a Land Rover and they are serious money. The fault code readers you can buy for £50.00 won't communicate with the Land Rover system. Well not with the diesel they won't. Unless someone knows of one that will, but i don't.
 
no worries, contacted a mechanic friend who has a couple of thousand £ snap-on one which should work :)

Cheers
Dan :)
 
You must log in or register to reply here.

Similar threads

JT_spark
Another P38 2.5DSE 4th injector Question
2
Replies
28
Views
3K
JT_spark
JT_spark
JT_spark
P38 DSE FIP issues
Replies
6
Views
1K
stemac33
stemac33
B
TD5 problems in the wet
Replies
10
Views
1K
BlueberryTD5
B
Lej
200 TDI cluch pedal randomly not engaging
Replies
16
Views
2K
steve2286w
steve2286w
S
L322 better but still not perfect HPFP?!
Replies
6
Views
1K
Steven911
S
Back
Top