Search results

Hi All, Approx 1 year ago i replaced my Fuel Pressure Regulator for a brand new one. I have noticed a decrease in MPG on my car and i at first suspected this culprit. As i looked underneath it did look a little damp around the starter motor, however after 20mins of watching the small...

I did all mine on the Disco from the top - Hardest part is getting to the bottom bolt, but a bit of percy got it in the end, took me 2hrs, start to finish

Join the club, Unfastened the seriously rusted screws and attempted to remove it one piece. In the end realised it was nowt but a pain in the.... and i snapped it into bits and lobbed it in the bin! Saves so much time when you want to do work on your car :) Plus you can get underneath anytime...

yep, different and many different types. If you do a search on here you will find a wealth of information! you'll also need a 32mm spanner to undo the sump nut on the R380 box

Thanks guys, its really faint but annoying. Its just a little chirp on.off.on.off I shall have look at these locations next weekend when hopefully the weather will be better!

Thanks Mate, Is it a difficult job to change them, its not really loud but annoying!

Hi All, I have recently developed a rather strange noise when the disco is on tickover or accelerating. It is very much like a cricket sound on/off/on/off and the more revs you give the faster it gets. It is worse when the car is cold too. Its not a constant squeel. Does anyone have any...

Hi, Just a quick one, When purchasing a nanocom do you have to buy one specific to the vehicle model? ie defender/discover or do all nanocoms have the option to cover both? Regards

Hi All, Is the TD5 Discovery Clutch change an easy job? - Obviously the gearbox will need removing, im assuming it will need completely removing therefore requiring the vehicle to be on a lift? Anyone done any or know of any step by steps? Searched the WWW our greatest friend but not found...

Hi All, This has probably been covered before but i cant seem to find anything so here goes. Is there any diagnostic machine out there that will fullfill the requirements of the TD5, including the extra modules to identify the cause of the 3 amigo's etc and also be suitable for other model...

Just realised i put Miller Oil, I meant to put MORRIS oils! The Lodexol specifically designed for the R380. (Or so they say)

The LR Transmission fluid is also MTF though isnt it?

Im not sure if i should put a little more in it, park the vehicle a little uneven and top it up a bit.. Maybe that will get it working a little better?

Hi All, I changed my R380 gearbox oil this weekend due to 2nd being a little stiff to get into gear, thought i should treat it to a spot of new oil! Its now more difficult to get in all the gears!!!!! (until warmed) Surely this shouldnt be the case should it?

Rightio Everyone, I have a copy of the T4 Software :) Now, the question is, how do you get it to work... Does anyone already have it and have it working?

Ive just been looking thro the worlds best friend (WWW.) and i have just come across this ROD END BEARING M8 X 1.25MM MALE - RIGHT HAND THREAD on eBay (end time 23-Feb-10 14:41:52 GMT) I wonder if i screw this into the spigot, clip on a ratchet strap to the eye, then clip the other end onto...

Ah, im liking the idea of winching it out! A Ratchet strap might be good for this if i get some threaded rod screwed all the way in and tighten her up? Heated the little madam for 20minutes yesterday and it just laughed at me! Will attempt the ratchet strap some time next week, im sick of...

Hello All, I am hoping some of you can shed some light on this simple job that has took me two days so far! The pinion is not coming out, once i have taken the propshaft, off i am met with the peg(Pinion) that covers the nut holding the flange on. I cant get this bloody thing out...

Its been resealed already, all the way round n all!

Hi All, I have a leaking A Post on the drivers side, I have NO idea how or why its leaking. If i peer up the side of the dashboard on the A Post i find that there is a small spot weld and its dripping through there. I have taken the wing off and can see no place of entry into the A Post, The...