Search results

sorry for got to say when a testbook is used it says data erro and not read the ecu it all started with the starter motor not wanting to work so he took some of the eath straps of and cleaned them up as well as the plugs for the ecu to make sure there was no oil in them now the starter motor...

ok so my bro in law td5 not start no sing of pump running when turns key on engain temp gose all way up and then back down even when cold after that hill desent lights stop on it will turn over ok but not start unlocks fine and the red flashing lights gose of fule pump runs fine when 12v...

hi all as anyone used the compressor that fills the air bags for any other use other than what they was mad for. i no longer need it as i have spring now and would like you use it for maybe blowing tyers up or just to blow the cab free from dust now and then anyone done this ? just thought i...

as any one done this to there discovery td5 ? i have a 2" lift (shocks and springs) and would like to put some 40mm spaces on to what other stuff do i need to do to make this work ? do i need new props ? brake pipes ? and what do i do about the abs wires ? do i need anything other ? any...

brake pipes sorry :)

as any one done this to there discovery td5 ? i have a 2" lift (shocks and springs) and would like to put some 40mm spaces on to what other stuff do i need to do to make this work ? do i need new props ? break pips ? and what do i do about the abs wires ? do i need anything other ? any...

thanks for the reply the fan is know longer on the truck i have taken it of the fan had stop working

what ?

hi all can any one tell me if the electronic fan on the front off a td5 is not work can this put the ecu in to default mode or not ? i think the main use is for the air con but also says in the ravco that its used to help cool the eng i was not sure if when the ecu dose its test on start up...

hello all i have a problem with my abs i needed a new sensor on the front drivers side because it got cut so i fitted new sensor and cleared the faults with the hawkeye but the abs light still on and also when i drive down the road the traction control keep going off there are no...

hello all again right i got one or two things to ask when the tc abs and hand break lights is on dos it put d3 td5 in a default mode ? y if i boost well over 230 kpa dose it not cut fuel ? not sure what to do now i have had new fpr 2 of fuel pump injector seals maf 2 of injector...

hello all again right i got one or two things to ask when the tc abs and hand break lights is on dos it put d3 td5 in a default mode ? y if i boost well over 230 kpa dose it not cut fuel ? not sure what to do now i have had new fpr 2 of fuel pump injector seals maf 2 of...

hi rabg no not yet still the same am going to try injector seals at the weekend there the last thing to do on fuel side for me apart from pips

hi thanks for rely about a week ago i put new filter on and i bled the system then may be getting air in from some were just put new fpr as well its not leaking it may be injector seals what do you think ?

ok when i turn key pump runs ok if i go to the fpr i can hear a sound from it like when you dont turn tap on full or water going thought hose pip with your finger on the end his this normal sound from that

can any one tell me if when i take the 5 plugs of the injectors its ok to have oil in the 5 pots on top off the injectors or should they be free on oil thanks dave

right ok ill try we all no what the turbocharger waste-gate modulator is ? mine was faulty so i bypassed it leaving the electronic plug on it well that plug i tested the voltage which was 14 volts with the car running i then pulled the plug off ( did not plug it back on )and put a...

hello i got a d2 td5 and having power prob i got a fault with the turbocharger wastegate modulator it as been byepassed with the plug left on i was then thinking today what the voltage was to the plug so tested it 14v with the eng runing then in the mad head off mine thought what will...

no not getting any errors from the hawkeye at all its say there no faults at all i do have the wast gate modulater bypassed cos when its inline psi goes up but like it stick at about 0.75 bar then goes on to 1.3 bar so i took it out of line the electric plug is still on it do you think this...

I mean inlet air temp sonsor