Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    defender slickshift

    http://www.landyzone.co.uk/lz/f7/clutch-spring-249494.html
  2. B

    Defender 90 Side Bars suggestions

    904 - Tonga Green
  3. B

    Defender 90 Side Bars suggestions

    I hate to say this but these britpart ones are solid and easy to fit..
  4. B

    Insurance

    :pop2:
  5. B

    rear cross member torx bolts

    Are they these ones? http://www.landyzone.co.uk/lz/f7/torx-screw-part-number-251419.html
  6. B

    Defender 110 ambulance camper conversion - help/ advise

    I saw this at the Devizes Beer Festival, looked very smart.
  7. B

    Torx screw part number

    Took a while but here is the finished result. http://www.landyzone.co.uk/lz/3140853-post25490.html
  8. B

    What have you done to your Landie today.

    Finally got round to repainting rear crossmember and replacing rusty bolts. Looks much tidier. But now the tub screws look scruffy :(.
  9. B

    Torx screw part number

    I love this site. Searched and found a diagram here AYG100250 - Land Rover Workshop Thanks James
  10. B

    Torx screw part number

    Searched but can't find :( Rear cross member is looking a bit tired and needs painting. Thought I would change these while I'm at it (circled in photo) Anyone know the part number of these torx screws, the ones that connect through the rear crossmember to the rear seat belt anchor bracket...
  11. B

    Clutch spring

    I did mine at the weekend, all done from inside. Make sure to check that the spring ends fit in the bushes before fitting them. I found one was ok but the other needed drilling out as the hole was too small. A 19" length of wood wedged against the seat box to keep the pedal depressed helps...
  12. B

    Decent, honest Landie specialist in the Wiltshire area???

    There is W J Joyce in Trowbridge but tell your bank manager first.
  13. B

    new here from wiltshire

    :welcome2:
  14. B

    Clutch spring

    There should be some sort of spring, there are two designs and both should work. More info here... Land Rover Anorak Technical 110 Station Wagon A nice mod if you find the pedal too heavy.
  15. B

    What have you done to your Landie today.

    Changed the bastard wiper park switch. What idiot put it right up behind the dash and thought a ****ty metal clip would be a good way of attaching it.
  16. B

    New arrival (ish), car and member.

    Keep telling yourself that :)
  17. B

    Removing wheel nut covers... HELP!

    Get yourself a 27mm socket and a long breaker bar, gentle pressure and no damage :) The short arsed wheel brace usually supplied is rubbish. And don't let any tyre fitters near the locking ones with their air guns.
  18. B

    Removing wheel nut covers... HELP!

    Which won't budge, the new ones just purchased?
  19. B

    Removing wheel nut covers... HELP!

    I may be completely wrong here but it sounds like they are standard nuts, not locking ones.
  20. B

    Another Chip Run Anyone?

    1 Boomer 2 Suew 3 The v8 man 4 James Martin 5 Cooper 267 6 Drewster 7 200tdi Ayre 8 Dogsbody 9 Sarah90 10 The Mad Hat Man 11 Snifflebag 12 Trewey 13 Ratty and Ballast 14 Barmatt 15 Hawky666 16 Buckshot 17 Forgottenpoppy 18 Ohitsher 19 Ginge 20 Blue Beasty 21 Crg64 22 Craigyb 23 Nrgserv 24...
Back
Top