Search results

Ok so I checked to see if the rockers were moving and nothing, so I’ve pulled the cover and rocker shaft off, the shaft and rockers all look good so I took the pushrods out and 4 of them are bent not hugely bent but still bent, is there a way to check the valves without taking the head off, or...

Hi, Yes I’ve spun it over with the injector unions off and nothing’s coming out, I’ve had the feed pipe off at the pump and it’s definately getting fuel, I’ve not found a gauze though. I’m not with the car now but tomorrow I’ll pull the solenoid off and take the inners out just incase, And no...

Hi all hoping someone can help, I’ve got a 93 disco 1 200tdi and on a long journey it just died at some traffic lights, it had been running beautiful for 2 hours doing 70mph, and as I said slowing down from 70 to 0 coming to some traffic lights it just died, no spluttering nothing just straight...

Hi does anyone know if a 2.5td injector pump will fit and work on a 2.5na?, Thanks for any help

hi does anyone know if a 2.5td injection pump will work on a 2.5na engine, My 2.5na injection pump is knackered and a mates got a 2.5td one and they both look the same to me, Any help would be greatly appreciated

Sorry disco 1 300tdi

Hi could anyone with a standard disco do me a massive favour, I'm in need of a measurment on the rear axle, I need the measurment from the flat spot on the axle where the bump stop would hit to the underside of the chassis where the bumpstop mounts, I'm trying to work out what lift my disco has...

Hi all thought I'd report back on what's happened with the p38, it's had a recon injection pump fitted and programmed to the car, but it's not changed anything, it's still hunting on idle and it won't start when the engine gets even the slightest bit hot, the garage has told me that after...

As title says I'm after a diesel fuel injection pump in good working condition for my p38 if anyone has please let me no Thanks Matt

Well the first couple were done by a garage a couple of units down from mine and he did it for free, but I'm sure once I get it in for live data reading it's gonna start adding up.

The idle was set to its normal setting earlier, I undid the bolts only slightly and tapped the top back slightly, I then started the engine to see if I was in the right place and there was fuel ****ing out from side of the pump is there suppose to be fuel in that area of the pump??, or am I...

Is there a way of putting it on correctly? I've got nothing to lose so may as well try and get it working if I can, do you have a guide as to what needs to be done or could you link me to one please?, I've done a search and found a thread about changing the seals in the injection pump and it...

Well it's come back as not having any fault codes, so the bloke played about with it and changed the idle settings but all it did was increase or decrease the speed of it idling so it was still hunting just slower or faster depending on the settings, he said it will be a mechaninical fault in...

its had this problem since I bought it and I've had it for a couple of months, I bought for my girlfriend as a cheap runaround and thought the problem was down to air in the fuel system but was proved wrong, it's going in today to have codes read on auto logic diagnostics by an auto electrician...

Ok so on close inspection I can see that the injection pump has been apart before, I haven't touched it yet and I don't no if the previous owner had it apart or not, I'm still trying to find someone with nanocom who can run diags on it, A local Landy garage uses auto logic, does anyone no if...

I don't no what diag is being used, there's a couple of good Landy specialists around so I'll have a word and see if they've got a nanocom, the other thing I was thinking is if it's injection pump related would getting that reconditioned fix the prob? Thanks for your help.

I've had the codes read again today since I fitted new no.4 injector, I wanted to make sure the injector wasn't still at fault and that's all clear now but it's come back with a new problem saying electric idle reset code 148 is what I've been told, I've had a look online and on the forum but...

Hi I've got a 1999 P38 2.5 dse It's hunting at low revs upto about 1-1500 but fine at higher revs, it won't idle at all just dies and takes a long time to fire up, so far I've replaced tank fuel pump and fuel lines as there was air in the lines but that's sorted now, I've replaced no.4 injector...

What a crying shame, it was a beautiful lane and its a real shame that its now been ruined for future generations.

hi all if anyone fancies laning this sunday we're going out whittlesey, march, chatteris direction. we're meeting at 10:00 at mc d's next to toys r us in peterborough, if ya wanna come let us no.