Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. G

    Indicators now flashing quickly

    Hi All Recently played about with my earths, as various lights were playing up/flashing including the opposite direction dash light, albeit dimly, and now that I've cleaned/sorted all those out, everything works fine other than they flash quickly like when a bulb has gone. The only other thing...
  2. G

    Smokey on tickover.

    Hi all, My series V8 smokes on tick over, after about 30 seconds to a minute of pulling up. It doesn't smoke when im driving, well I cant see any. Would I be right in thinking its probably worn valve guides, as it doesn't have any oil seals, as its the early heads. I have rebuilt it with all new...
  3. G

    Pinking

    Hi All Probably a stupid question, but when you hear pinking, is it really that noticeable. My V8 runs really well (I think). I've timed it by ear as it were, advancing it as much as possible, but cant advance it anymore as the vacuum advance hits the water pump. I don't think it's pinking...
  4. G

    V8 Tapping when warm

    Hi all I have recently rebuilt a 3.5 V8. Sounds lovely on start up, but then as it warms up, you can gradually hear the tapping coming and getting louder until its at its loudest when fully warmed. It sounds like just one noisy tappet. Anyone have any ideas why it would do it when...
  5. G

    V8 Conversion Plate

    Hi All, I purchased a series V8 conversion plate about 8 months ago on ebay which arrived in excellent condition. Having just finished building the V8 I thought I would just check the conversioin plate against the gearbox, and found the studs/bolts dont line up. I have seen similar ones...
  6. G

    Diesel Breather pipe

    Hi All Can someone tell me how much pressure should come out the breather cap, oil filler or dipstick pipe obviously if removed. What is considered to be normal. Also, could just a blown head gasket in some cases cause this. I seem to have quite a bit, and just wondering if it can only be...
  7. G

    Engine wont start

    Hi I have recently change my injectors in an attempt to stop it smoking on hard accelerating, and now it wont start. I have blead the fuel filter, pump a few times now and it would appear to be fine with no air. It did start fine before I changed them. Two questions I'd like to ask, how...
  8. G

    Clutch Plate Fitting

    Hi Can someone please help with a simple question. I guess its simple if you know the answer. Which way around does the clutch plate go on my Series 3. It's not marked on the new plate, or if it is I cant see it, and like a plonka i forgot to make a point of noting when I took the old one...
  9. G

    Near Side wheel leaning in

    Can someone please help, suggest what my problem is. My nearside wheel appears to be leaning in at the bottom when viewed from the front. The tyre is wearing on the outer edge, and the tyre on the off side is fine. I have jacked it up, and I dont seem to have any free play anywhere. Any...
  10. G

    Series Winch Bumpers

    Please can someone shed some light on Series winch bumpers. Why are they so hard to find? Why aren't they readily available ? I just don't get it. Any ideas where I can get one from. Thanks
Back
Top