Search results

Hi Our lasses 300tdi auto is having some problems, it only revs to 3000rpm which is where it seems to want to change gear. I have tried it sat on the drive in neutral but it's like there is a limiter in place. I have fitted a new turbo top hose (it's been de EGR ed), cleaned out the sedimeter...

My swivels only have the fill plug at the top so is it likely to have one shot or oil in? It's a 1997 Disco 300Tdi :) If it's oil is it a case of taking to bits or can I syphon it with my big syphon thingy? I would've taken the plug out of the top but I think it was put in by Samson on the...

Our lasses Disco 300Tdi has started squeaking a lot and fairly loudly. I tried the penny trick but no better, so changed the fan belt, also no better, so changed the bearing in the tensioner, alas still no better. So now I am thinking either the water pump, although it uses no water, or the...

On t'bay 1995 LAND ROVER DISCOVERY TDI OFFROAD MONSTER on eBay (end time 10-Aug-10 11:25:43 BST) At least the discription is honest :D

A mate has just got some heavy duty springs and two are short. Are these for the front or back? I had a quick search and it seems the longer ones go on the front but my original springs are longer on the back although they are heavier :confused: I'm more confused now than normal :D Ta

Has anyone sucessfully mounted a camcorder in their landy :eek: rather than holding it in their hand.? I've also been looking at the sports type camcorders that stick to the screen but I don't know if they'll be any good once they are getting bounced around laning etc. I already have a decent...

Hi I'm after the seal numbers for the rear diff and the transfer box rear output shaft - the one that comes out into the handbrake drum. It's a 300 Tdi Discovery 1997 with the R380 gearbox. Thanks

Discovery 300Tdi 1997 :) Driving back today noticed that the old lass was vibrating badly, a bit like when you accelerate hard in too high a gear, only a lot worse when I accelerate. It doesn't do it in the lower gears 1,2, and 3rd it does it in 4th from about 30mph and in top around 50 mph...

At present I have alloys on my Disco, I am putting a set of Dakar tyres on and I am thinking of putting modulars on as well. The modulars seem to stick out more (offset ?) so will this cause me any problems with excess wear on wheel bearings etc? I know it's probably a stupid question but if...

While changing wheels today I noticed some play in the driversr side front hub. I tightened up the bearings and took it for a spin and it pulled to the left, not badly but enough. I stripped the hub down and checked the bearings etc, put it all back together, noticed one of the lugs had snapped...

Just a quickie:eek: Are Insa Turbo Dakars directional? They are similar to bfg muds (or so I am told) and I thought mud tyres had to be fitted the correct way so they dig in and grip. Cheers

HI I am after a single button remote locking fob for a Discovery 300 Tdi 1994. Part number : LUCTXTJ1 Frequency : 433.92 MHz Anybody got one they want to sell? Thanks :)

Freeing up the high/low/difflock. Is there anything I need to know other than go in from the bottom if up on ramps and plenty of duck oil and then copperslip Or go in from the top Remove centre console and associated bits, drill out rivets and remove cover, plenty of duckoil and then...

When ordering parts and it says to 38S44171D or from 38S44171D are these numbers the engine number, VIN number or what? I am buying brake calipers if that makes any difference. Ta :)

I have a 300 Tdi and the pads are loose in the calipers. I have replaced the pads and the retaining kit but they are still loose so it looks like new calipers are required. The question is where is the best place to get them from? Paddocks £41.50 + vat is the best price I have found so far...

As title. Mine have a trim sort of thing around the edge with little chevrons all heading the same way, could this be the way they need to be fitted? Many thanks :)

The mirror glass is moving when it shouldn't be, I can hear the motor running but it wont move the glass in and out, just up and down. Any ideas or is it a new one? Cheers

The other week my mileometer was due to go to 100 k but didn't turn it just stopped on all the 9s. I thought it might just need a little help but there is no cable to slightly turn and the numbers wont move. Any thoughts? Its a 300Tdi, 1997 manual. Thanks

Hi I'm after a rear diff to propshaft flange, the one that connects the rear axle to the donut. Any idea where I might get one, other than Land Rover or the local scrappy. Thanks for looking.

Ok. This time I have gone for the GKN one not the cheap Paddocks one. How do I know which lugs line with which part of the donut? (I did mark them before I took the original one off so I know where they were originally but want to be doubley sure if at all possible) The three lugs are in line...