Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    clutch problems after sitting in the weather for too long.

    ok, left it overnight, now won't go into gear (unless you sync the revs and bump it in).... pedal all the way to the floor still. I thinking along the lines of what Europa said, dodgy master/slave... will have to strip it down and have a looksie. Clutch oil is still at the same level when take...
  2. C

    clutch problems after sitting in the weather for too long.

    Howdy Folks Bertie (SIII, 88") has been sitting outside for over not really moved much due to family issues then covid mess. Jumped in today to try and get it going again.... got her started, went to put into gear, clutch all the way to floor and not coming back up again. Can engage gears but...
  3. C

    Stolen 110, Oban - Puffin Divers

    THEFT OF VEHICLE - OBAN Police Scotland has received a report of a stolen Land Rover 110 Defender, registration H20 PDS from the Puffin Dive Centre, Gallanach Road, Oban. The vehicle is believed to have been stolen between 2200 hours on 19 April and 0615 hours on 20 April 2019. The vehicle is...
  4. C

    Broke Bertie :( klunk then the propshaft and wheels stopped turning.

    Confirmed 10 splines for me.... oddly a washer both sides was the only thing famousfour couldn't supply. :/
  5. C

    Series 3 Bertie is now Historic!! VED free -- 1975

    Hello Folks If your v5c says 1975 the rolling Historic Tax rule came into effect yesterday. Just changed my tax bracket and got my years ticket for nowt at the post office today. Over the moon happy !! Cheers Craig
  6. C

    Broke Bertie :( klunk then the propshaft and wheels stopped turning.

    Thanks for your input guys... just had a butchers at it... and now feels like I won the lottory. Short shaft is spinning on the drive member :) Think I'll change both sides and drive members....
  7. C

    Broke Bertie :( klunk then the propshaft and wheels stopped turning.

    Thank you for the quick reply and detailed pictures. Both my rear wheels are turning by hand, without the propshaft even trying to move. Have it in 2wd with handbrake on and wheels chocked. Lifted one side at a time. something to do with rear diff ??
  8. C

    Broke Bertie :( klunk then the propshaft and wheels stopped turning.

    Hi Folks Any clues on this one.... driving along normally, loud clunk then lost drive (in 2wd) propshaft and wheels stopped getting drive. Works ok if I engage 4WD (hi or low) but I think it's only driving the front wheels. Put it back in 2WD no movement.... What have I broked this time ...
  9. C

    insurance

    Lancaster have got it back down to normal levels... YAY!! Shame on Footman James. :(
  10. C

    insurance

    Hi Folks Who's the best to go to for classic car insurance now ?? after 7 years with Footman James the renewal quote is silly £££ and nothing has changed. On enquiring further through their helplines it is due to them only using one end provider or something :-/ Anyone got insurance for sub...
  11. C

    Pressure building up in coolant system.

    Mine had the same issue... had it in the garage to sniff check and pressure check. Turned out to be the water pump, it was leaking and allowing air in... Initially presented as steam and no water in expansion. On refilling and running expansion tank over pressuring and throwing water out the...
  12. C

    Freelander 1.8 K series hgf - more data

    Well that's me on the HGF bandwagon... I think My expansion tank is pressurising and throwing all the water out the cap... strangely no mayo on the oil caps and no oil in the coolent :S In garage next week to get a sniff test. Back in me trusty 88" Series III :)
  13. C

    half shaft/wheel bearing/brake sticking/other gone ??

    Thanks Fella's, I have jacked the back of the landy up and checked the wheels between rain and snow. I think your correct about the wheel bearing colapse on the offside rear the wheel is wobbly as jelly and brakes are binding slightly. I think your correct about it not being the half shaft...
  14. C

    half shaft/wheel bearing/brake sticking/other gone ??

    Hi Folks Landy spat his dummy today. Driving home from work about 40ish mph went round slow left corner... grinding, grinding, crunch, bang from the rear offside (I think). Managed to limp home but deffo not driving right now. Feels loose and is wanting to crab around corners. Any clues on...
  15. C

    classic insurance.... lost ability to drive other cars third party.

    Hi Folks I have been insuring me landy through Footman James for years and years... At renewal time - the latest sting in the tail is that they can no longer offer insurance with the ability to drive other cars third party.... Phoned them up to see how much it would be to add it on to be...
  16. C

    thrust bearing gone (or on way out) ???

    Hi Folks After a long day towing my fishing boat me landy got upset :( If I press the clutch it doesnt go all the way down, gear changes still work tho it's biting higher. When the clutch is pressed in there is a dry whirring noise... it disappears when in gear and clutch depressed. Is the...
  17. C

    charge warning bulb, Series III

    Hi Folks Can someone tell me what bulb to get to replace the charge light (the red one in the water/fuel gauge side) and how its fitted - push/clip/twist ?? I think its a steering wheel off job. I think the bulb is blown because; * doesn't come on when ignition switched on * if I remove the...
  18. C

    master cylinder shot ??

    Hi Folks Just a quick follow up, turned out to be master cylinder as suspected. Replaced it with an oem part. With the old one on the table, I can see that the pushrod doesn't return fully extended, also took the opportunity to replace the flexi pipes, tho the old ones look sound. So great...
  19. C

    master cylinder shot ??

    Hi Folks Just had an interesting experience... Thought the brakes were binding on a drive... landy was braking by its self and the drums getting hot... could hear them squeeling slightly Pulled over... everything locked up tight. Brake pedal didn't budge, it was solid stuck at the top and...
  20. C

    More chequer plate sir?

    If your a big lad like me it deffo has to be the wing tops.... saves them distorting when your inevitably working on the engine :)
Back
Top