Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. K

    Oil pressure light is on but gage is high

    I was not certain as to the couple of the response and thought it would be easier to just provide a picture of the filter with both sensors. In fact both are electrical, but I’m not certain as to age or if it is the original. I’m thinking it’s not. I tied a thought if I decrees the oil weight...
  2. K

    Oil pressure light is on but gage is high

    The engine is a 2.25.. I’m pretty sure. 1973. If the kit does not have one that fits I will go from there. I’m going to buy the pressure kit since it cost is worth the gamble. thanks for all your help Kevin
  3. K

    Oil pressure light is on but gage is high

    Thanks for all your replies. Here is some additional info and responses. I think that the light sensor and gage are different since the gage was working while the light was not. I had the sensor replace during other work and the first did not work. This is the second. BTY I had the frame...
  4. K

    Oil pressure light is on but gage is high

    Hello As the title says I have an oil gage and it is reading a 6 where the highest number is a 7. I recently change the sensor and now after my series 3 runs for 15 minutes or so the light comes on. My dip stick is showing the middle between low and high. I have change my oil to see if the...
  5. K

    S3 Handle for Latch to bonnet (US Hood) is not releasing lock

    I”m likely not using the correct words to describe my little problem, but the handle When I push it to open does not seem to be moving far enough to disengage the lock and allow me to lift the bonnet more then an inch. The handle is moving as far as it normal would. Any secrets in getting me...
  6. K

    Series 3 Unscrewed Plunger(denten) on top of Transfer - Easy Fix? Transition not working

    Thanks Extreedoc After reading your reply I took a look and it broke off at a poor weld. I'm going to take a look at rewelding as a quick fixed. I also have to own up. I wondered if it was possible when my son and law had started her up if he had move the over drive into neutral. Mystery of...
  7. K

    Series 3 Unscrewed Plunger(denten) on top of Transfer - Easy Fix? Transition not working

    Well guys let me answer the first question Yes it was the brass plug. The one with the spring. I've been on a trip for 3 weeks and had my son in law started it up and did not move her. I got home to check the fluids before I drove her and after I did the detent plunger. I started her up and...
  8. K

    Series 3 Unscrewed Plunger(denten) on top of Transfer - Easy Fix? Transition not working

    Thanks James for the quick reply It seems to still be out. But now I just dump gas on the fire. The shifter broke off. It seemed to not want to go into first so I rocked it back and forth then tried your suggestion using the steps below, but I guess I had to much muscle I guess in trying to...
  9. K

    Series 3 Unscrewed Plunger(denten) on top of Transfer - Easy Fix? Transition not working

    I mistakenly unscrewed the plunger for the detent spring (I thought it was the overdriven filler) and now the transmitting is Not Working. Have I just created a big mess or can I fix the problem easily? As you might have gather I'm not to savvy on most things mechanical. Thanks Kevin
Back
Top