Search results

thanks will try at weekend

I,m going to change my clutch master and slave at the weekend, just wondered how easy it is... I,ve removed the slave before to clean it up but not sure how to remove the master cylinder. its a 53plate 1.8 petrol btw. any advice? cheers

i thought the system was sealed....how do i bleed it?

surely someone out there must have a working clutch to tell me how far the plunger travells:)

freelander 53 reg 1.8k series my clutch pedal is pretty much on the floor when it bites been looking through clutch threads and main problem seems to be master cylinder.. ive checked the plunger mounting bracket which is sound and the plunger operates... what i need to know before replacing...

all fixed thanks

many thanks a job for tomorrow

electric window mechanism (complete) and door switch for rear drivers side(o/s)...mines goosed, motor seized and cables all tangled up... 2003 1.8 stationwagen

can anyone tell me how to tighten the handbrake, MOT is next week and I'm sure it's a fail at the mo. its a 2003 1.8 petrol station wagen cheers

How can i tell if the u-clip is fitted properly...had a quick look and it rotates when twisted but doesnt seem to lock into any specific position? bracket seems corrosion free cheers

No fix yet will probably get a new clutch fitted and see if that fixes it

I've got a 1.8 freelander (yes i know its ****e) with 45k on the clock gear selection when the engine gets hotter becomes more difficult when its cold there is a couple of inches travel on the clutch pedal before it bites but as it gets hotter the clutch pedal has to be right on the floor...

Would the ABS light come on too if it was the sensors, or does the hill decent use different ones?

my orange hilldecent warning light has srarted to randomly come on and go off any ideas why cheers

Had a search before i posted, all i could find was some stuff a the td engine aboult serial and parallel conections of the pipes.. I guess this doesnt apply to the 1.8 thanks

is the console easy to remove? if so i'll check it at the weekend thanks

Got a 1.8 2003 freelander and the heater is not warming up. don't appear to be any leaks anywhere any ideas? thanks