Search results

Hello knowledgeable folk. Can I remove my rear floor (SWB) and replace the supports (and top hats) with the tub on? Noticed that a few have holes in……. Thanks Rich

So I managed to find a decent 2 1/2 petrol 3MB cylinder head at Malvern this weekend. It’s cleaned up really well and not bad for £20. The number on my head is ERC 5899 but the other is 568750. Both look the exact same and the spare seems to have less wear on the valves etc. Also, should I...

Random one - I've noticed my front axle is level on one side with the front wheel arch (FWH line up with the front wing) but the other side is about one inch shorter. I used a straight bar and measured both sides. The axle brackets, suspension, and wheels (all the same) are all in line and the...

Hi knowledgable folk, So whipped the head off and after borrowing 2 x valve spring compressors (both bent) I've order a decent one. So....are 2.25 valve springs a pain to compress? Also I've noticed one of my exhaust valve spring is sitting higher than the rest (please see pic). Does anyone...

So....ive had leaking valve stem seals for a few years now (puff of smoke on start up then clears). She does use some oil but runs really well with 130 PSI in each pot. Starts well from cold and when it's been left for 10 - 50mins. However anything after 15 mins and it takes an age to catch...

Morning all knowledgeable people. my series 3 runs great in 2WD. Even in 4WD up to about 40mph. So after a run yesterday I thought I’d put the FWH in and leave it in 2WD to lube the top bearing. At about 40-45 there was a vibration from the front axle which disappeared when I disconnected the...

Hi all, so I ‘think’ I know my issue but would like to check with you knowledgable peps on here. So the other day tried to start but Bty was flat. So changed to a good spare, flat after a few days. Starting checking the Alt and it’s giving out 8v with minimal Amps so I’m thinking Alt. But...

Just a shout out to let you know of a fab company that you can get all your oil seals and bearing from for half the price. Ive had a Fairly overdrive clutch bearing and recently 2 x Aero parts Capstan oil seals for £4.20 (Was £15 on another 'bespoke' landy spares website...

Hi all, just been perusing flea bay and came across this for all your 24v Wolf peps. Cant see it staying at £15 :(...

Happy Christmas all, My recent Christmas present from the Defender is a leaking adjustment bolt which sits on the top cover (Gemmer 6 bolt) and around the steering adjustment screw. Any ideas were i can get a new nut rather than the whole service kit for £20? Thanks in advance

Morning all, I think i know the answer but recently changed the axle oil (Def 90, G Reg) and when checking the other day its was nearly black again. I do have a slightly weeping front right swivel seal (swivels have 1 shot grease in) so i'm thinking the axle oil is getting into the swivel...

Sold Sold thank you

Incorrect item

So…being Defender and Series person I’m looking at selling one to get a Disco. I’ve seen one for £2400 with 177k on the clock. These engines are a unknown to me and it’s got part history - potential buyer but are the TD5 ok for miles? thanks

Morning All, Quick question if i may - Would a 300TDI radiator fit into a 200TDI incl oil cooler hoses? Would i also need to get the 300TDI Oil filter housing and would this bolt straight onto my 200TDI block? Thank you all knowledgeable people Rich

so....my S111 jumps out off 1st unless you hold it forward. I’ve stripped the top off the G/box and found the ‘potential’ culprit. It seems that the selector fork is quite worn (please see pics). Everything else is spot on but the movement I need to keep it in 1st is approx 5mm. Does anyone know...

hi knowledgable folk. After cleaning out my sump and resealing it I found a piece of metal that looks like Its from the engine block itself. It looks to me like a blind bolt hole that’s had a bolt put in to far and scabbed off. Engine is completely fine and runs well. Thanks in advance Rich

Hello all, Does anyone have the part number just for the steering box input seal pse? Ive got a leak and dont need the full kit. Thanks Rich

Hi all, I've an oil leak which is coming from the cam side plate which the oil breather goes into. Its the one that is helpfully just behind the Fuel Inj Pump on the right side of the engine. I know the bolts are 10mm but can i get the cover off without taking the inj pump out? Im not sure how...

Hi all, Does anyone have link were I can see what parts are what on my Injection pump. I need to know where the fuel pipes go etc and where the solenoid wire goes. Thanks Rich