Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    Front Parking Sensors L322 2008

    Hi all, The two front central parking sensors (nearest to the number plate) are not clicking. Is there a quicker route to them which does not include removing the whole front bumper? Thanks, Jon
  2. J

    L322 Rear Wiper

    Hello, I have just replaced the wiper cog in my l322 rear wiper motor. The wiper works but stops at 6 o'clock with a slight buzzing sound, if I push it, the wiper runs and stops correctly. If I pull the wiper off the glass or runs ok'ish... But isn't smooth. Any thoughts? Jon
  3. J

    Stripped Wheel Stud L322

    Tell me about it, long story short I was in a pickle and needed a flat tyre sorting, I was suited and booted so didn't want to get filthy... Paid the lad double as he stayed late to do it. Oh well, sorted now 👍.
  4. J

    Stripped Wheel Stud L322

    Absolute legends!!! Cheers all for getting back in touch. Tapped it off the thread with a small screwy and hammer. Thanks again!
  5. J

    Stripped Wheel Stud L322

    I'm going to try to remove the wheel this evening, hopefully you're right. 👍
  6. J

    Stripped Wheel Stud L322

    I'm confident they have done it, but they don't appear to be the conscientious.
  7. J

    Stripped Wheel Stud L322

    Thanks, I will have a go and keep you updated. Thanks for the reply, greatly appreciated.
  8. J

    Stripped Wheel Stud L322

    HNY all! A local garage stripped my wheel stud and is refusing to do anything about it. As I only noticed when I got home, they said it must have happened out of their care. Does anyone know the procedure of removing the stud and replacing? 2008 L322
  9. J

    Disco 3 (LR3) Parking sensors

    Hi there, do you know if they are they linked? So if one doesn't work they all don't?
  10. J

    L322 Parking Sensor Fix

    Hi there, do you know if they are they linked? So if one doesn't work they all don't?
  11. J

    2008 TDV8 Central Locking

    Hi all, I still have issues. I replaced the part on the video before as mine looked water damaged. Does anyone know if the 2008 - 2011 facelift has a different programming procedure? I can only find videos with the old key and interior layout.
  12. J

    2008 TDV8 Central Locking

    Thanks for the reply, I will investigate further.
  13. J

    2008 TDV8 Central Locking

    Hi, thanks for the reply I have tried but no luck. I have read threads about disconnecting the battery, so I will try that.
  14. J

    2008 TDV8 Central Locking

    Hi all, I have had a good look for threads before I posted but can only seem to see pre-face lift issues and solutions. Issue - both keys unexpectedly stopped working the central locking. Drivers side opens with the key (with alarm sounding) and car will start off key as normal. I can operate...
  15. J

    L322 PCV? EGR? Fuel Burning Heater? or other?

    Hi, Recently I have noticed that my l322 3.6 tdv8 2008 Range Rover has started smoking under the engine passenger side. This seems to take place when parked up from a run out. Earlier this week the engine check light came on and I had it plugged in with the attached errors... please can you...
  16. J

    Going into limp mode...

    It turned out to be simply a split turbo hose and a dodgy air flow sensor. Quick fix and all sorted...
  17. J

    Going into limp mode...

    Many thanks for your help, I am going to have a good look at it this week, it is still happening but is extremely random. I will keep you all posted.
  18. J

    Going into limp mode...

    Ok, I will investigate and report back. Many thanks... Do you know if there is a Haines for this year range? I'm struggling to locate one.
  19. J

    Going into limp mode...

    Yea... All looks ok. I have noticed a slight whistle tonight under harsh acceleration.
  20. J

    Going into limp mode...

    So yesterday my Range l332 3.6tdv8 decided to cut out, a quick turn of the key and away she went again. But it is still happening... I have been advised that it might be the right turbo... This is the image from the reading. Please advise... Jon
Back
Top