Search results

hi all, I've just replaced the C posts on my 110 county and now need to paint them. I've checked the tag in the engine bay but the paint code isn't shown so was hoping somebody could guide me in the right direction. It's a 1988 110 csw in blue, but what blue would it be...any ideas ?

hi all, Im looking at fitting a turbo boost gauge to my 110. I'm running the original 19j engine which I've rebuilt and is running well but I'd just like to keep a check on the turbo performance. Where would be the best place for me to run the gauge pipe from? A picture would be good if...

hi all, im looking at buying an old 110 county with the 2.5 turbo19j engine. the one im looking at "collects" a little oil in the air filter housing from the breather pipe, is this normal and how much is acceptable? when the hose is removed there is stream of smoke/gas coming from it is this ok?

hi all, are the brake pipes on a 2a 3/16" ? also would the unions be unf ?

hi all, im fitting a new clutch to my 2a. is it worth doing the complete clutch or just the plate?

hi all, my recently aquired 2a seems to be leaking oil by the handbrake hub. is there a gearbox oil seal situated where the hub joins the box? is it hard to change?

hi all, ive recently added a 1964 2a to the fleet. ive been having a dig about underneath today and she seems pretty solid. the worst bit is under the passenger seat, looks like a battery tray? is a replacement panel available for this or would it need fabricating as i canr seem to find one...

hi all, ive just sold my 3.5 RR and am looking at buying a 109. the one im interested in is 1965 2a which has had a galvanised chassis fitted at some point along with a replacement bulkhead, the bulkhead would appear to be from a series 3 as it has the later dash. my question is, is there anyway...

hi all, the warning light has been flickering on my 1984 range rover for the last couple of weeks.today ive taken a look at it and as the brake pads were getting low ive changed both front and rears. ive also emptied and refilled the fluid. the light is still flickering and the brakes feel even...

hi all, ive got a problem with my headlights that im going to try to sort today and any help would be appreciated....unless i pull the fuse the headlights are on continually! would this be a relay problem or something to do with the switch? or something else im missing?

hi all, can anybody direct me to a clear diagram of how my gearstick is attached to the box! was driving home today and the stick became sloppy,carried on driving as i needed to get the old girl home but... just before i reached home the stick came off altogether! i cant quite work out what goes...

hi all, ive got immobiliser/alarm problems with my 1984 RR. its an aftermarket unit fitted by the previous owner and its packed up! the fob wont disarm the alarm anymore(tried new batteries) so its immobilised.ive tried removing the alarm unit thinking i could just do without it but that still...

hi all, the headlining in my classic is looking a bit tired(material starting to bubble etc) so im thinking of changing it .ive got a fibreglass replacement hanging about that ive had for a while.has anybody tried covering a fibreglass one with similar material to original? or should i just...

hi, can anbody running a low compression 3.5 v8 engine in their RR (8 25 1)give me an idea of performance? im thinking of fitting a recon one to my RR but its currently got a high compression engine fitted (9 35 1) and am looking for a realistic idea of performance difference.

im trying to find a replacement 3.5 engine for my 1984 RR but am having trouble finding any information regarding engine and gearbox compatability. my gearbox is an early longstick 5 speed .can anybody help or point me to a site that may be able to help?

is there any problems involving changing a 3.5 v8 efi to run on carbs? is it just a matter of taking the injectors etc of and fitting the carbs then plugging the injector holes in the heads

hi , can anybody tell me if this engine is suitable as a relacement for my 1984 RR with an early 5 speed box,power steering and electronic ignition.would it fit straight in or would any mods be required? "will fit early range rover,landrover series 3 stage 1 109 v8 or 101 forward...

hi all,i recently serviced my 1984 RR but let the oil drain from the pump before replacing the filter! so i have taken the filter cover off and packed the gears with vaseline as stated in the manual,put it all back together (including filling the filter with oil before fitting) and now i cant...

hi, the adjustment on the drivers side front armrest on my 1984 classic wont allow it to come far enough down to be horizontal! all the adjustment appears to have "jumped" out of sequence and is far to high toi be useable...anybody tell me how to correct it?

hi all,anybody tell me if these alloys on ebay will fit an early RR classic? item no:110188589021 cheers matt