Search results

Hey folks, i have the very same issue at the moment, front prop UJ is in a pretty poor condition at the moment though it si the original and has 168934 miles on it so all in all not too bad i suppose, any way i was also wondering what if any adverse effect would it have if i were to lock the...

Hi all!!, Its been quite a while since i was on here as i was travelling and working.... anywho, i want to put some rather large tyres on my truck... my concern is... my truck is an auto and i don't know if I go too big will the tyre diameter have an adverse effect on my gearbox?? I was...

Is it inside this turkey?

So a bit of an update.... i haven't ventured as far as removing the pump but i have replaced the fluid with lucas oil rack and pinion stop leak to see if that would perhaps help a tad..... it has a bit though still leaking it certainly isn't leaking as bad.... next i will remove the pump and...

I have the very same problem at the minute! I took the feed hose off earlier and noticed wear on the metallic piece where it fouls against the engine sump but it wasnt wore through so i tightened the union, refilled the reservoir took her for a run and shes still leaking, it appears to be coming...

Downloaded and you are 100% correct, the wiring schematics are much more comprehensive, thanks for the responses lads, greatly appreciated!! :) MERRY CHRISTMAS!!!!!!!!!!!! :)

Agreed, and iv got the schematics from the Haynes manual i bought and the color code doesnt seem to match up exactly, so i am kinda hoping i can get a straight forward answer as to which wire does what so i can tackle the job along with my dual battery install with integrated VSR to power my...

Guys...... im doing some wiring and adding some bits and bobs modifying my disco, my question is what wire does what?? (gauges, warning lights etc) I was going to start going through them all cutting each one to see what went out and reconnecting so this is really to save me the hassle of all...

Its just too sensitive for my liking, at least now its like the car i can switch it off and on when i like ;)

Nice one lads.....much obliged :):):):):)

Thanks for the response Brian..... I understand what your saying but im kinda hoping that there is perhaps a wire that signals for the TC to fire.... an input wire or wires somewhere that i can link into and mount a switch on the dash. Would you know where i could source a connection / terminal...

I have a 2003 disco 2 TD5 auto and i want to either remove the TC or at least put a switch on the dash were by i can switch it off and on whenever suits..... in fact that's what i really want to do.... install a switch on the dash, which wire controls the TC or what would be the quickest way of...

I have put on a set of 245/75R16 Maxxis mudders and they seem to not have hampered the performance and runs just fine and dandy as my Disco is now my daily driver..... i was wondering though as i am considering putting on some larger rubber and taking into consideration my Disco is an automatic...

Ahhhh...... So as a quick hide the 3 amigos for my impending MOT at the end of this month until i can source the OEM part and replace could you then link it out at the SLABS ECU or on the sensor lead going back to the ECU? I was gonna do it on Monday when im off next. Cheers sierrafery

Sounds awesome! Its pure therapy for me!! i love tinkering at her and planning the next job..... i was underneathe her the other day finishing the FPR (what a session) and just noticed that i had some "play" "slap" on the output shaft from the transfer box going to the rear diff so i will...

Cheers lads!! great advice and much appreciated!!! the adjustment done the very trick! Another question (though not handbrake related) the ABS sensors on each wheel..... do they operate on a resistance value reference back to the SLABS? or is it a simple NO/NC circuit?? PS... thanks again you...

How are you getting on with your disco? I had to buy a fuel pressure regulator today and im gonna fit her tomorrow (weather prevailing) Iv had ALL of the common issues that most TD5 / disco 2 owners have been faced with (just my luck it all seems to have happened one after the other) so if you...

Guys, i ripped out the bags.... to be honest i just wanted to have that little less to worry about , to be honest i don't miss the SLS, and the conversion was very straight forward so i would recommend it to anyone who couldnt be ar%*d messing around with any airbag or compreesor type issues...

Just an update, i took my xyz inhibitor switch off and emptied a can of electrical contact cleaner through it, allowed it to dry out, sealed it with sikaflex, relocated the drain pipe for the air con using some festo fittings so it wasnt draining directly into the xy switch, put it all back...

Lads im having the same issue with my 2003 auto disco 2, handbrake cable up full whack and the disco starts to slowly move down hill... im relying on the park position through the box. Is it the same on my disco just adjust in behind the switch mounting plate? Cheers in advance