Search results

Just glue 4 corners

I also have one, ok for the money work fine. They are easy to open up even once glued to put new battery in.

yea like i said

http://www.landyzone.co.uk/lz/f9/td4-lack-power-70mph-fixed-77147.html

There made of bronze alloy not copper so will last forever in there

Most Diesel's I have owned do this even my TD4

Hill Decent Control, only works in 1st and reverse, Hill Descent Control (HDC) allows a smooth and controlled hill descent in rough terrain without the driver needing to touch the brake pedal. When on, the vehicle will descend using the ABS brake system to control each wheel's speed. If the...

I thought even new/recon VCU gave tightness when steering? Also Check Clutch pedal bite point, if its getting near floor then could be Master/Slave cylinder on the way out

chain

I replaced that horrible gear gator with a proper leather one and a new leather gear knob, finished it off nicely

Id say 13.5 mm would be better :D

Think it could be a faulty element as have traced wiring from fuses to screen and all good. I guess the previous owner had a new screen fitted they should have chased up the fitter as the whole car could have gone up! I will remove the fuse as its only the passenger fuse getting hot.

Cheaper to do it like this with a 22mm cooper end cap, Dont need the hole thats stop management light on BMWs, worked great on my freelander.

I did this mod on my BMW 120d but tried it on my Freelander TD4 and works perfect. For this Cheap Mod you need a 22mm Cooper Pipe end stop like this. You then need to disconnect your EGR and give it a good clean out. Then pop the end stop in the EGR, its a perfect fit nice and snug! You...

I have a recently bought face lift TD4 freelander and the heated windscreen wasnt working when I bought it. On investigation in the engine bay I noticed the windscreen fuse box had melted/burnt out, and even some of the wiring!! I bought an after market fuse box and cut the melted wires back...