Search results

As all ways fantastic fast reply Many thanks...Will do..Daz

Hi all,not posted for along while, too busy lying under the bloody thing. The problem I have is just purchased a new disco while I rebuild the current one only Adrian Flux want another £50.00 per month on top of what we already pay because it is a different vehicle... Is this right, have...

Thank you for your quick reply. So just to be clear.... recode new key / keys or recode and block previous key...Yes.. barrel does not need changing.... apologise for my stupidity just need to what to tell dealership. do we need to get proof of this in writing...??? Thanks for your...

Hi All haven't posted for a while. hope that won't go against me. My mate has a Disco 3, had a few problems with it so took it back to dealership that he bought it from. Anyway to cut along story short our main concern is they have lost one of the keys. They said they will cut...

I've been through the same myself buddy but did it myself so only paid about £400 for new head and all bolts gaskets etc... possibly like you I am now over paranoid in fact im a bit ocd about my coolant system. My heater normally starts to gets warm within 4-8 miles at 30,40,50 mph...

Don't think it will ever get hot with stat out. Iirc water circulates round cyl head pump and heater matrix only until stat opens allowing water to pass through rad to be cooled. Did heater get hot before you took stat out? Why remove stat what do you mean by blown up ?

First thoughts....yeah he's back time to catch up on a great thread.... then I read the whole post after the pics, Feel for you mate, really do. Initial thoughts say yes for now keeps you in work for anther 4 weeks,,,, gives you time to think and make up your mind whilst earning, Christmas...

Totally agree with you, however most people that buy these are desperate that's the point..just want to fix their motor for mot etc.. etc.. Most people doing regular work/restorations would more likely invest in better equipment.

sorted that quote for you mate I know chassis thickness as I have one. Point is op was about a 100 amp amateur hobby welder gasless. these are suitable for up to max 4.5-5mm, I am under this belief as I have one and have read the manufacturer's instructions. If you are saying they are...

Yes, especially if you are a beginner much more forgiving and better control = less stress for you:)

Make you mind up - the chassis IS heavy steel, about as heavy as a 100 amp gasless will handle anyway + there's nothing else much thicker on the motor I've found this takes a lot of trial and error to get right on some of these the max setting will just blow through. for bodywork use min...

+1 As a relative noobie although I have quite enjoyed looking through the "galleries" would be nice to be able to link to threads etc... Members may be encouraged to link to/from their gallery / build threads as they wish. Not to sure "Members Rides" is an appropriate title though...

Aladdin Autovent Radiator HV30 Self Bleed Valve Beat The Gas Price Hike | eBay out of interest has anybody ever tried one of these, did search but didn't see anything.

It will probably be a lot worse than that when you remove the plastic sill covers trim etc.... still easily repairable. Do you weld? Just one of the many pleasures owning a Land Rover pass/fail depends on your mot man but irrelevant needs doing anyway. Best of luck

I also checked both pipes at back of engine to heater matrix were not too high as this can cause problems and had heater controls set to hot Cable tie header tank to bonnet stay to make it higher than thermo housing cap and then follow James Martin's procedure BB posted Fill slowly

:doh: getting old ! yeah you're right mis read/quoted what I was trying to say was "limited use" falls into one of the exemption classes as does disabled, nhs etc..

Limited Use is Tax exempt for disabled I think so should be able to tax it in normal way. check v5

+1 Don't know if it was easier for you than doing a Disco but looking at your pics you certainly seem to have better access/viewpoint from inside the cab. Having somebody else to rotate the engine is always a bonus. Next time it goes i'll bet you will do it in half the time :D:D:D

try awr4375puy