Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. O

    Early P38 - Aftermarket Temp Gauge or Kit?

    Hi All, so I appear to suffering from the Random temp gauge reading issue on a M-reg (1995) P38. Gauge reads randomly hot & cold, even on cold start. Garage also assures me block is cold (annoyingly, didn't do it while in the garage). I suspect ground wire issue, or similar (...am also...
  2. O

    P38 Switchpack - Purple & White wire?

    Hi All, going through the P38 switchpack replacement routine. Old one wouldn't raise/lower all the windows. New one will open but not close the sunroof, so back to the breaker again... but that's not my question: In the centre console there is a multiplug jumper for the switchpack, but there...
  3. O

    P38 - Rear Windows - only working from Rear?

    Hi All. my P38 back on the road, but I have a couple of gremlins/grumbles. I had some ignition/lockout problems, now fixed. The rear windows however, appear not to work from the centre console in the front. They will however work fine from the switches in the rear doors. The rear window...
  4. O

    Winter wheels and tires - recommendations?

    Hi all. Happy New Year! :) so of course the snow arrives and I'm late in getting my tyres sorted. I know it's going to melt, but I'm expecting to use the Rangey on an ice and snow prone ungritted road for most of the winter, in Snowdonia and Northern Scotland. Only on roads and forestry...
  5. O

    Stepper Motor / Air Idle Control Valve : as easy as it sounds?

    In theory: - plug off the plug - unscrew - switch for the new one, grease the fitting a bit - reconnect the plug Is it that simple? In the world of Landy's I suspect that I'm being naive...
  6. O

    Cheapest source for a (new) blend motor set?

    Hi all, so I'm likely to need to replace at least two of the blend motors in my P38 SE in the next few weeks. I hear I'm in for fun and games, though I am ambidextrous and have small fingers which might set me in good stead ;) Anyone know of a reliable supplier of affordable blend...
  7. O

    P38 Loadspace Lights?

    Hi all. I've spent the day doing 'housekeeping' on my 95/M P38 SE, fixing mirrors, interior lights, and most importantly, adding cupholders! Whilst flicking through the service manual, I see various interior light bulbs that I don't have ... I guess part of a later spec, or the HSE or...
  8. O

    P38 Engine Management ECU Compatibility?

    Hi all, first off, hello. I've been reading the forum and the pages for a few weeks since I acquired a P38 (and new way of life, in garages, trawling breakers yards, etc), and I'm hoping that someone here can point me in the direction that I need to go! I already love my P38, but it does...
Back
Top