Search results

hi i must be old fashoioned cos i couldnt px it when it wont rev past 2000, its not driveable. i do have a psi tuning box going for 150 cheers

hi all if you read my other posts you will see that i have been having fun with my td4. its been a brill car, so i shouldnt complain about 1 little problem. so next time i am going for a petrol and get it lpg

i got as set of ebay for a tenner, the bolts on my car were rusted to **** but it stil gripped them.

:eek: :o hi thanks for that, the figure i was looking for was about 2000 rpm. all sorted now cheers

hi disconnected the maf sensor and its much better, the guy i got the car off gave me a roveron maf thing, he said he had got it but never fitted it cos he thought it was tuning chip which it wasnt. i didnt want to fit it incase i did any damage, that was 20,000 miles ago. i part ex the car...

i will try the maf sensor today. thanks for the help

hi, the hose split on my prev freelander, the power loss was similar but there was also loads of smoke. i have checked both pipes and they look ok but i will take them off and double check. i took it for a spin last night and it seems ok when cold, with a slight flat spot. as it got hot it...

hi all, my 2003 td4 is very pporly, when stone cold it drives ok but a little rough. once warm it wont rev past 2000 when under load, my thought was that perhaps the turbo isnt kicking in, what makes the turbo kick in. there is no smoke or other undue symptons

hi all coming home today in my 2003 td4. its done 85000 On the motorway for a split second the car started to hold back at about 70 mph. then returned to normal. this happened a couple of times. then when i came off the motorway and had to acelerate it had little power and wouldnt rev beyond...

hi, i guess you mean road fund licence, - do you mean registered after march 01. which MODEL do you have, is it worth paying extra for one with all of the toys, and what would i get from an lpg one per gallon. i have read people saying they get 100 miles on a tenner. i want mine for mainly...

hi all, going to sell or swap my 2003 d4 es and get a range rover, i am going for one around an x reg. what would you go for ? a diesel or a petrol with lpg. the car will be used mainly for mway driving and towing a caravan. i travel with my job and put the mileage down as expenses so...

hi all. was going to do an oil change on my 04 td4, thought it would be a straighforward job, used to do this on my older x reg freelander. any how the two bolts at the front of the sump guard, the passenger side one is solid. my socket just turns on the nut, there is no room to get mole...

Hi all what engine oil do you put in your td4? i used to put gtxd magnatec in my x reg model but cheers

hi steve - the wiring loom supplied with thelamps contains a relay and switch connector - these items are already on the car and i ave traced the wiring from the switch to the relay on the fuse board on the drivers side, have also put a fuse in fuse 21. did you wire your own tow electrics -...

hello the kit the chap gave me included a wiring loom and instructions, when i compare the instructions to my cars wiring i can see a relay the same as the one in the kit already fitted in the space as shown in the instructions. going to take the bumper off at the weekend and connect the...

hi all cant see a pipe on the nearside. my is an es model and comparing the instructions included in the kit it looks like the wiring is already in place for the lamps. so i installed the switch in the dash by the clocks and put a fuse in the correct slot but there is no power at the spot...

hello thanks for replying, can i check if it has the fuel heater without removing the bumper? where is it fitted. is that why some A bars wont fit? cheers

hi all, when i got my freelander td4 2003 model the guy gave me a set of fog lamps - landrover part number stc 50469. these include all the wiring and instructions etc. he said he had bought these but never fitted them as they require removal of the bumper. looking around i believe these...

hi. also when moving off from a standstill i have to push the pedal virtually to the floor before i can engage first. however there is no slipping or other problems, and when on th emove the clutch isnt so heavy

hi all. last year i sold my old td4 - it was a 2001 s model and bought a vectra diesel. anyway have now sold the vectra and bought another freelander. this time its a 2004 td4 es. a much nicer car, however the clutch feels very heavy, not too bad once on the move but have to push the...