Search results

All sorted. No leaks. :)

Cheers guys. I have a Schrader valve extractor somewhere, I think. I used to use it for refrigeration systems repairs. I'll see if it'll fit tomorrow and post my results here.

Hi. I've noticed today that the fuel rail pressure test point is leaking on my gems 4.6. Is it possible to change the valve? Thanks in advance. Jas.

I didnt repair my fast idle problem after cleaning ICV, replacing ICV, replacing TPS and taking it for a long run. Still the same. Abandoned. Off to the pub.

After it continually stalled on me on the way home from Norwich yesterday and wouldn't start and run from cold this morning, I've cleaned the ICV and gave it a quick itallian tune up. Seems to have done the trick.

I know of a chap nearby with a hawkeye. Would that show anything up?

Thanks for the link. I've found someone in my area user ' DMWD'. But I cant work out how to make contact. The chap is in Narborough in Norfolk.

Ok Henry. Thanks for the info. I'll give it a good thacking on Saturday and see what happens.

Hi Grrrrrrr. I dont have any access to diag stuff. All I have is the freeware EAS and home made plug. The software will show up fault codes i think. Will check tomorrow on fault codes. Is there anyone in Norfolk that may have the gear I need? Plugs and leads were changed last year.

Dicky on both after a short run. Changeover from petrol to gas or vice versa makes no difference to running after a restart after a short journey.

Interestingly, it's only happened since I've started using gas again after a 2 or do month break. May be coincidental with the cold weather?

Thanks guys. I'll have a play over the weekend.

Living the dream

Hi all. This may have been covered on prev threads but I'm unable to find anything specific. It starts on the button and idled fine. Today i started it, let it run for a few mins as I only had a 2 mile journey to the supermarket. I was only 5 minutes. When I got in, it started straight away and...

After trawling the internet and not willing to pay a fortune getting one from overseas, I took a chance on a secondhand air filter box with sensor included. Fitted it, worked a treat. Motor starts on the button.

Brutparts say obsolete

Hi there. Can anyone help me locate a supplier of the air intake temperature sensor for a 1998 4.6 Gems P38 please? The sensor on the side of the intake filter box. I'm having difficulty sourcing one. Thanks.

Hi there. Can anyone help me locate a supplier of the air intake temperature sensor for a 1998 4.6 Gems P38 please? The sensor on the side of the intake filter box. I'm having difficulty sourcing one. Thanks.

Thanks gents for the info you've offered so far. The only pics I have are attached. Symptoms: Cold starting- turns over for some time before firing. Feels like only running on a few cylinders to begin with. I have to gradually feather the throttle until all cylinders fire. Too much throttle and...

My name is Jason. I've recently bought my first Land Rover. A 1998 Range Rover P38 4.6 with sequential LPG. It's in lovely cosmetic condition but it has trouble starting from cold and I suspect it's running rich on petrol. Wish me luck