Search results

PM'd you Datatek.

Just to reiterate I am not concerned about not having the photo dipping or anything else working as my car does not have these and I dont have the electric seats so no memory, I just want to know if the wires for the heating and electric adjustment are the same colours on all looms because if...

My plug only has six pins and nothing blanked off you could not fit a 12 or 10 pin in it, I just wondered if the wires could be cut or even if the the old harness could be taken out and put into the new wing mirror. I had to loose the wing mirror as the other alternative was those white tubular...

Some ****ing chaved up peasant racing a Honda in a ducato van has wiped out my o/s wing mirror, and not stopped. The only new complete wing mirror I can get is either 10 or 12 pin type can these be adapted to fit the 6 pin and still work without sending the ecu or dash messages in to raptures...

Im not trying to stir the Sh*t here but as other people have said any car will loose the brake servo and power steering if the engine cuts out. I think maybe the OP should try a German as they never ever, repeat NEVER EVER break down, get an X5 I dont think the tensioners brake on those but they...

Just to add to my above post with this method you dont need to hold the fan, just make sure you give a very hard and sharp strike, the chisel will maul the nut a bit but i promise you wont break anything.

As already stated a long (and sharp) cold chisel will always undo a viscous fan, i have never been beat by one yet and i used to look after a fleet of old shape Trannies and you had to take the fan off to do the timming belts, must have done hundreds.

Get a petrol, diesels are for defenders and lorries not a gentlemans carridge, besides the bm derv in the Rangie has head and head gasket issues. I will say I would look for one with the eas as this is a big part of the car and when you have such a prestigous car its nice for it to be as it...

Not on the DVLA, so may have bit the dust.:(

I have to say from a mechanics point of view derv pump leaks quite often mean a specialist repair, if you are going to have a go be careful as there are usually springs and the like waiting to sring out from behind any plates or covers you remove.

Does anyone know who makes the genuine LR branded roof bars for the disco 3 , my brother in law has no key and wants to take them off without damageing them. LR have been no help saying the keys are no longer available. I would hazard a guess at Thule

My Rover Sterling sunroof key is identicai (not surprising really) . That will now take up residence in the Rangie instead.

Lots of black smoke does mean fuel is getting through and not burnt, but could still a fuel problem, when it does start does it splutter for a bit or does it just fire?

Has anyone got a picture or drawing of how this ram fits. I can make a bracket no problem, but I cant see how it works the ram wont tilt down to fit on the lid as it seems to be in a recess, all I can think of is that there is a big chunk of over complicated plastic missing. Please help as I can...

I didnt mean it dropped open, I meant it literaly drops open to the floor or the passengers knee's. I didnt know the ram pulled it closed, I think I can vagueally see from the picture how its fixed. I think mines missing a mounting braket.

We used to have Varta batteries at work for our plant and vans, rubbish in my opnion, we now use Exide and they are much better. Varta just seem to get away with it because of the usual percived German quality.

I will try my best to describe my problem, my P38 glovebox lid drops straight down when opened, the little ram is not attached to the lid and I cant see how it works, it almost looks like its pointing the wrong way and there is no way to attach, Im a mechanic so am not incompitent but I just...

Is the wiring for the subwoofer already installed ? As I would like to fit one to 1998 SE it has the CD shuttle in place and the grille at the top of the panel, they seem to be easy to come by.

Sorry chaps didn't see your replies before the post to Matt, Thanks. Has anyone had any experience of water in the tank or the system in general ?