Search results

aup sam, have you blanked your EGR? me disco is miles better at pulling away from junctions now and dosent do the dreadful 1.5 sec lag thing, if i rev mine in neutral from idle upto 3,000RPM the let off the pedal mine has a partial second of splutter but this is the only case so i do not do it.

cheers landowner thats a tick in the pro's box, what should i expect to pay for a decent snorkel? ie looks tidy and does the job well?

hello to all, does a snorkel affect performance? can anyone give me a the pro's and con's? many thanks Ian

take your belt off the pulley and see if there is any play in the bearing to the water pump, mine sheered off last week :doh:, better to be safe than be sorry. also take your 2 plastic filler plugs out and top up system (300tdi can hold 11.5 L or 2.53 gallon) and keep redoing this until you cant...

hello nati, theres many oils that can be used in in your 300 tdi, 10/30, 10/40, 15w/40 and 20w/50 (in hot weather) like CharlesY said its best to use a cheaper oil and change it more often to get rid of all the small metal deposits and carbon build up than to use a synthetic or semi synthetic...

cheers CharlesY have edited post for those out there that are so chuffed they forget the coolant lol

Hello to all, thought id try and make a D.I.Y water pump guide this is my first one so sorry if not up to standards lol Things i needed 32mm Fan Spanner 10mm Spanner Socket set Stanley Knife blade Couple of screwdrivers (undoing clips) Fine sanding block Hylomar gasket paste Plank...

Thanks for advice, bought mesen a fan spanner, job sorted now just keeping a close eye on air lock if there is any, Thanks again Ian

Hello to all, today something very strange happened to me, was outside cafe and water was dripping, so popped me bonnet and started her up ( 300Tdi ) next thing water pump pulley had sheered off :eek: and bounced around engine bay :doh:, took drive belt off and crawled it home only 0.5 mile and...

hello to all, does anybody know the sizes of all the breather pipe connections and the size of the plug to the fly wheel housing? reason is im looking to make my own wading kit to see if it is cheaper than buying a wading kit, as times are tight ;) going to price the bits up to see if i can save...

yep buster's photo guide is very good, just done the job at weekend, main swivel seal and swivel bearings because i had shattered bottom swivel bearings and there was play in the swivel which caused the leak, if you need any advice please feel free to ask. :)

This could be what your after, http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2735/47/91/515963368/n515963368_1607767_6516384.jpg Number 17 is the drain plug for the autobox

Doesnt that affect the MOT in anyway?

Hello chaps, what does the damper and shield bracket actually do? Part 17 ) I know its the bottom anchor point for the brake disc shield, does it do anything special because land rover have bummed up on this one because, there's 2 T-40 Bolts that hold the bottom swivel pin in and there totally...

Anybody know what size spline socket is needed for swivel housing ball to axle? stripped the whole lot off today and was beaten by these bolts dam it, my lower swivel bearing had callasped and there was diff oil for fun while i was driving, Thanks for reading this, Ian

same as veduk said looks like the "P" gasket

Nobody has been at your fuel delivery screw have they? but like dent and colinl stated need to know colour of smoke.

Couple of websites state that wheel spacers improve the turning circle does anyone know of the pro's and con's of these, any info will be very helpful, thanks for reading this, Ian

Got to be K&N, 300Tdi/ Mpi K&N can be bought for around the £30 mark, 200 Tdi can be bought for around £38, blank of your EGR, get a plate and a washer for around £5 off ebay and have a scan round for a metal hoover pipe cut to size and take off the whole unit, also after youve taken off you EGR...

RE: question about the ep90, where abouts are you? i work for a small oil company and we do just about every oil, i work in main warehouse, filling etc but i might be able to pull some strings with lads at shop and see if i could get some at a reduced price for a fellow landrover owner lol...