Search results

so are you saying scaffold tube is ok or not and would 4mm wall 2" gas pipe be ok for a roll hoop. and would a roll hoop like this be ok if it was clamped/ bolted to the chassis gcoo8154 hope you dont mind be pinching your pic

found a chap who would make a cage if i supplied the CDS tube but still dont know how to attach it to the chassis as dont want to weld on galvanize.

just a thought are the internal roll hoops any good as wont have to cut the body then and has anyone got pics of how they mount to the chassis.

looking for a roll cage for me 90 after a couple of brown trousers moments thinking it was going to go over, so can anyone recommend a roll cage for a 90 hardtop that bolts to the chassis. thanks

looks like a good basic kit but would recommend getting new turret rings, spring retainers and possibly extended hoses. you might also need dislocation as some times the shocks are longer than the springs at max droop.

take some of the goodies off like the front winch and the tyres and use them on you next landy.

try NFU they are ok and normally don't care about mods.

just had a look and they are different.

i have just bought a disco 1 trialer and its got a new decarbon steering damper and the one on me 90 is not that good and wondered if the disco steering damper would fit on me 90 thats got a 2" lift.

i run standard land rover alloys with 265/75R16 tyres and 35mm spacers and have no probs and i have friends who run there landys with spacers and larger wheels and have no problems.

its got a 200tdi disco engine. looks like its leaking out from under the throttle spring.

was greasing the props on my landy after a short trip to the farm and noticed a very large puddle under it, so i had a closer look and smelt diesel and there is diesel all over the inside of the engine bay on the drivers side and diesel dripping from the injection pump. checked all the pipes...

i have got a set of 750R16 mud terrains on range rover classic steel wheels and wondered if they would fit a standard 1991 range rover as looking for a rangie for off roading and to use on the farm.

warn piston rings or could be cracked pistons its a common td problem

have a look on here but remember if you go more that a 2" lift you will need different props. Mail Order 4x4 Defender 90 Packages

i had a straight through exhaust with only a small cherry bomb silencer on my series 3 that had a defender 2.5n/a engine and to be honest it made no difference to power/speed/mpg just made it really loud like my tractor. only turbo landy engines a full straight through exhaust makes a...

i normally get 28mpg if its having a lot of right foot but normally getting 30-35mpg in me 90 (disco 200tdi conversion with standard defender gearing) when running on me bfg all terrains but when running on my mud tyres i get about 15-22mpg so tyres can make a big difference and some snorkels...

tdi conversion

was fitting me off road gear on my new landy today and the steering guard wont fit as the holes ya bolt it to normally where the lashing down eyes are just behind where the jacking holes should be are not there and the jacking holes are not as well they have been cut off at some time and...

just bought a landy 90 but its got a soft top but want a hard top with van sides and a rear door to put on it instead of the soft top so is there any one who wants to swap a hard top with van sides and rear door for my soft top with sticks and tale gate. plastic window on the back has a split...