Disco 2 Hawkeye Total odometer reset

Hoylander · Feb 14, 2021

Anyone know how to stop the odometer flashing on D2 TD5 with a Hawkeye Total?

I've tried via the BCU without success.

It started flashing after continuing to drive with a faulty alternator.

sierrafery · Feb 15, 2021

So do you say there's no odometer "error warning" setting in hawkeye BCU menu ?, it should be as long as it is in the old hawkeye but might be confusing... try again and disable that one, IIRC it should be saved as "No (odometer) error warning"

Hoylander · Feb 15, 2021

I'll try again tomorrow hopefully. Thanks for the advice Sierrafery.

Interceptorxj · Feb 16, 2021

and don't forget to update us please.

Hoylander · Feb 16, 2021

I've selected "no error warning" but when I come back out of BCU it reverts back to the odo flashing.
Should it be that if I select no odo warning, then come back out of all menus it should stop my odo flashing?

sierrafery · Feb 17, 2021

Hoylander said:
I've selected "no error warning" but when I come back out of BCU it reverts back to the odo flashing.
Should it be that if I select no odo warning, then come back out of all menus it should stop my odo flashing?

You have to get to the end and confirm the setting

Hoylander · Feb 17, 2021

Thanks for all the help folks.
In BCU menu 14: no error warning then menu 1 change market values or words to that effect.
No flashing odometer now

Disco 2 Hawkeye Total odometer reset

Hoylander

New Member

sierrafery

Well-Known Member

Hoylander

New Member

Interceptorxj

Well-Known Member

Hoylander

New Member

sierrafery

Well-Known Member

Hoylander

New Member

Similar threads